In-line filter for spray guns
The filter can be directly connected to the spray gun to filter out dust & oil in the air.
It is mainly suitable for spray guns using compressed air as it needs to be
positioned upright to function properly.
Easy to drain valve located on the bottom.
Supplied in hanging box.
Thread: 1/4 BSP....
In-line filter 1/2 BSP
In-line water traps/filters are necessary to separate water & oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Manual
A push-in fitting is located on the dr..
Three Stage Filter Without Gauge
Stages: Sinter, Fine & Carbon
A three-stage filter system, composed of sinter, fine, & carbon filters, is designed to effectively remove
impurities from air or liquid. While gauges are often used to monitor filter performance, this system can function
without them.
1. Sinter Filter
P....
Pressure
filter for compressed air
Type F200 (16 Bar)
The F-200 Compressed Filter is a tool designed with jettisoning & protection cup.
The cup has a fluid capacity if 50 ml.
It has a maximum inlet pressure of 16 bar & a
filtering of 10 micron.
Moreover, this compressed filter has a maximum working pressure of 6000 Nl/....
Pressure
filter for compressed air
Type F300 (16 Bar)
The F-300 Compressed Filter is a tool designed with jettisoning & protection cup.
The cup has a fluid capacity if 150 ml.
It has a maximum inlet pressure of 16 bar & a
filtering of 10 micron.
Moreover, this compressed filter has a maximum working pressure of 9000 Nl....
In-line filter 1/2 BSP
In-line water traps/filters are necessary to separate water & oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain....
Pressure
filter for compressed air
Type F180 (12 Bar)
The F-180 Compressed Filter is a tool designed with jettisoning & protection cup. The cup has a fluid capacity if 30 ml. It has a maximum inlet pressure of 12 bar & a filtering of 10 micron. Moreover, this compressed filter has a maximum working pressure of 2.100 Nl/min or 6 bar.....
In-line filter 1/4 BSP
In-line water traps/filters are necessary to separate water & oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Manual
A push-in fitting is located on the dr..
In-line filter 1/4 BSP
In-line water traps/filters are necessary to separate water & oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain....