Annular Hole Cutter Tct 22 X 55mm Weld Shank 19.05m

Extra Information

• Use with magnetic-base drills or drill presses fitted with a Weldon-shank arbor.
• A pilot pin is required for centering and slug ejection (sold separately).
• Apply cutting fluid and steady feed, especially on stainless or harder grades.

Features

• 22 mm diameter — accurate sizing for anchors, bushings and clearance holes.
• 55 mm cutting depth — handles common plate thicknesses and stacked material.
• 19.05 mm (3/4') Weldon shank — two-flat drive for secure clamping.
• TCT teeth — long life and sustained cutting speed in structural steel and cast iron.
• Thin-wall, multi-flute geometry to speed penetration and evacuate chips efficiently.

Benefits

• Faster holes than twist drilling by removing less material.
• Smoother finish with reduced burrs and less cleanup.
• Extended tool life from wear-resistant carbide tips.
• Lower effort — reduced feed pressure on vertical and overhead jobs.

Safety

• Wear eye, ear and gloves protection; use cutting fluid to manage heat and chip flow.
• Verify magnet adhesion before drilling; tether the drill when working at height.
• Do not use hammer action; maintain straight, steady feed and allow the slug to eject.
• Disconnect power before changing cutters or pilot pins.

Specifications