Item No: TCAC0001
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,168.52
Ex VAT:R 1,016.10
New Expected Date :
- 07/02/2025
Item No: TCAC0002
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,333.43
Ex VAT:R 1,159.50
Item No: TCAC0004
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 53.71
Ex VAT:R 46.70
Item No: TCAC0005
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 57.21
Ex VAT:R 49.75
Item No: TCAC010
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 437.35
Ex VAT:R 380.30
New Expected Date :
- 07/02/2025
Item No: TCAC014-2
Annular Cutters 55mm long
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 453.62
Ex VAT:R 394.45
Item No: TCAC016-2
Annular Cutters 55mm long
Annular Cutter: &O/; 16
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 515.49
Ex VAT:R 448.25
New Expected Date :
- 15/01/2025
- 22/01/2025
- 15/04/2025
Item No: TCAC018-1
Annular Cutters 30mm
Annular Cutter: &O/; 18
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 411.01
Ex VAT:R 357.40
Item No: TCAC019-1
Annular Cutters 30mm
Annular Cutter: &O/; 19
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 419.23
Ex VAT:R 364.55
Item No: TCAC024-2
Annular Cutters 55mm long
Annular Cutter: &O/; 24
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 749.17
Ex VAT:R 651.45
New Expected Date :
- 22/01/2025
- 15/02/2025
- 15/04/2025
Item No: TCAC027-2
Annular Cutters 55mm long
Annular Cutter: &O/; 27
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 731.00
Ex VAT:R 635.65
Item No: TCAC028-1
Annular Cutters 30mm
Annular Cutter: &O/; 28
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 584.20
Ex VAT:R 508.00
New Expected Date :
- 22/01/2025
- 15/02/2025
Item No: TCAC032-1
Annular Cutters 30mm
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 795.92
Ex VAT:R 692.10
New Expected Date :
- 22/01/2025
- 15/02/2025
- 15/04/2025
Item No: TCAC032-2
Annular Cutters 55mm long
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 840.31
Ex VAT:R 730.70
New Expected Date :
- 15/01/2025
- 22/01/2025
- 15/04/2025
Item No: TCAC033-2
Annular Cutters 55mm long
Annular Cutter: &O/; 33
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 927.88
Ex VAT:R 806.85
New Expected Date :
- 22/01/2025
- 15/02/2025
Item No: TCAC035-1
Annular Cutters 30mm
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 845.42
Ex VAT:R 735.15
Item No: TCAC035-2
Annular Cutters 55mm long
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,098.37
Ex VAT:R 955.10
Item No: TCAC038-2
Annular Cutters 55mm long
Annular Cutter: &O/; 38
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,373.27
Ex VAT:R 1,194.15
New Expected Date :
- 15/01/2025
- 22/01/2025
Item No: TCAC040-2
Annular Cutters 55mm long
Annular Cutter: &O/; 40
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,373.27
Ex VAT:R 1,194.15
Item No: TCAC042-1
Annular Cutters 30mm
Annular Cutter: &O/; 42
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 1,318.30
Ex VAT:R 1,146.35
Item No: TCAC045-1
Annular Cutters 30mm
Annular Cutter: &O/; 45
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 1,340.27
Ex VAT:R 1,165.45
Item No: TCAC046-1
Annular Cutters 30mm
Annular Cutter: &O/; 46
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 1,628.98
Ex VAT:R 1,416.50
Item No: TCAC050-2
Annular Cutters 55mm long
Annular Cutter: &O/; 50
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 2,473.02
Ex VAT:R 2,150.45
New Expected Date :
- 22/01/2025
- 15/04/2025
Item No: TCAC055-1
ANNULAR HOLE CUTTER HSS 55 X 30MM WELD SHANK 19.05MM....
R 1,923.15
Ex VAT:R 1,672.30
Item No: TCAC058-1
ANNULAR HOLE CUTTER HSS 58 X 30MM WELD SHANK 19.05MM....
R 1,785.66
Ex VAT:R 1,552.75
Item No: TCAC018-3
ANNULAR HOLE CUTTER TCT 18 X 35MM WELD SHANK 19.05MM....
R 845.54
Ex VAT:R 735.25
Item No: TCAC022-4
ANNULAR HOLE CUTTER TCT 22 X 55MM WELD SHANK 19.05M....
R 956.63
Ex VAT:R 831.85
Item No: TCAC026-4
ANNULAR HOLE CUTTER TCT 26 X 55MM WELD SHANK 19.05MM....
R 1,007.40
Ex VAT:R 876.00
New Expected Date :
- 22/01/2025
Item No: TCAC030-4
ANNULAR HOLE CUTTER TCT 30 X 55MM WELD SHANK 19.05MM....
R 1,007.40
Ex VAT:R 876.00
Item No: TCAC060-2
ANNULAR HOLE CUTTER HSS 60 X 55MM WELD SHANK 19.05MM....
R 3,235.70
Ex VAT:R 2,813.65
Item No: TCAC064-1
ANNULAR HOLE CUTTER HSS 64 X 30MM WELD SHANK 19.05MM....
R 2,830.67
Ex VAT:R 2,461.45
Item No: TCAC075-3
ANNULAR HOLE CUTTER TCT 75 X 30MM WELD SHANK 31.75MM....
R 3,012.60
Ex VAT:R 2,619.65
Item No: TCAC095-3
ANNULAR HOLE CUTTER TCT 95 X 30MM WELD SHANK 31.75MM....
R 4,455.68
Ex VAT:R 3,874.50
Item No: TCAC095-4
ANNULAR HOLE CUTTER TCT 95 X 55MM WELD SHANK 31.75MM....
R 5,151.89
Ex VAT:R 4,479.90
Item No: TCAC006
6mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 400.03
Ex VAT:R 347.85
Item No: TCAC011
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 394.34
Ex VAT:R 342.90
Item No: TCAC012-2
Annular Cutters 55mm long
Annular Cutter: &O/; 12 mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 481.10
Ex VAT:R 418.35
Item No: TCAC013-2
Annular Cutters 55mm long
Annular Cutter: &O/; 13
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 481.10
Ex VAT:R 418.35
Item No: TCAC014-1
Annular Cutters 30mm
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 364.26
Ex VAT:R 316.75
New Expected Date :
- 15/01/2025
- 22/01/2025
- 15/02/2025
- 15/04/2025
Item No: TCAC015-1
Annular Cutters 30mm
Annular Cutter: &O/; 15
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 345.58
Ex VAT:R 300.50
Item No: TCAC017-2
Annular Cutters 55mm long
Annular Cutter: &O/; 17
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 507.27
Ex VAT:R 441.10
New Expected Date :
- 15/01/2025
Item No: TCAC020-1
Annular Cutters 30mm
Annular Cutter: &O/; 20
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 457.99
Ex VAT:R 398.25
Item No: TCAC021-1
Annular Cutters 30mm
Annular Cutter: &O/; 21
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 460.52
Ex VAT:R 400.45
Item No: TCAC021-2
Annular Cutters 55mm long
Annular Cutter: &O/; 21 mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 611.74
Ex VAT:R 531.95
Item No: TCAC022-2
Annular Cutters 55mm long
Annular Cutter: &O/; 22
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 644.69
Ex VAT:R 560.60
New Expected Date :
- 15/01/2025
- 22/01/2025
- 15/02/2025
- 15/04/2025
Item No: TCAC023-1
Annular Cutters 30mm
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 507.50
Ex VAT:R 441.30
Item No: TCAC023-2
Annular Cutters 55mm long
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 685.98
Ex VAT:R 596.50
Item No: TCAC026-1
Annular Cutters 30mm
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 641.07
Ex VAT:R 557.45
Item No: TCAC026-2
Annular Cutters 55mm long
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 804.20
Ex VAT:R 699.30
Item No: TCAC030-2
Annular Cutters 55mm long
Annular Cutter: &O/; 30
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 892.17
Ex VAT:R 775.80