Item No: GIO5000
ADAPTOR M5X0.45 X 1/4'F/M FOR AIR BRUSH....
R 73.43
Ex VAT:R 63.85
Item No: GIO5000-1
ADAPTOR M5 X 0.45 X 1/8 F-M FOR AIR BRUSH....
R 90.39
Ex VAT:R 78.60
Item No: SG AH01
Airbrush hose M5 Female x 1/4 BSP, 1.5m
long
This vinyl hose is ideal for the
SG A138 single action airbrush.....
R 110.29
Ex VAT:R 95.90
Item No: SG AH02
Airbrush hose 1/8 x 1/4 BSP, 1.5m
long
This spiral vinyl hose is ideal for most airbrushes.....
R 110.29
Ex VAT:R 95.90
Item No: SG AH03
Airbrush hose M5F x M5F, 1.5m
long
This spiral vinyl hose is ideal for single action airbrushes.
O-ring sealed to prevent leaks.....
R 89.53
Ex VAT:R 77.85
Item No: SG AH05
Airbrush braided hose 1/8 x 1/8 BSP, 3m
long
This hose has been woven tightly with nylon to be more durable.
O-ring seals have been fitted to prevent leaks.
Max pressure: 5.8 bar....
R 139.21
Ex VAT:R 121.05
Item No: SG BD-117
Quick coupler set for airbrushes
The quick coupler set includes the coupler as well as the connector, to fit
between the hose & the airbrush to allow for a quick disconnect.
Always make sure that the airbrush is placed in a holder, before
disconnecting the coupler.
Thread: 1/8 BSP
Material: Nickel plated brass....
R 134.78
Ex VAT:R 117.20
Item No: SG BD-18
Airbrush st&
The airbrush st& compliments the 6 pc airbrush set -
SG A813 as each holder is designed for each airbrush in the set.
The st& has 6 ports. Each port has its own MAC (Micro Air Control) valve.
Simply connect x6
SG AH05 hoses (not included) to use the st&.
The st& includes a h&y pressure gauge to regulate the inlet a..
R 1,542.96
Ex VAT:R 1,341.70
Item No: SG BD-400
'Helping h&s' for airbrushing
There are 6 'helping h&s' to hold a project securely in place while using
an airbrush.
It allows you to keep your h&s free & clean while using an airbrush. Ideal
for use in hobby spray booth -
SG
E240....
R 442.35
Ex VAT:R 384.65
Item No: SG BD-430
5 pc cleaning set for airbrushes
These micro cleaning brushes are designed to get down those hard to clean fluid passages. They are small & flexible & essential for airbrush maintenance....
R 91.43
Ex VAT:R 79.50
Item No: SG BD-470
Airbrush nozzle cleaner reamer
This nozzle cleaning reamer is ideal for clearing dried paint in the fluid tip of an airbrush.
With careful use, it can restore the nozzle back to perfect condition.
Suitable for nozzles &O/; 0.2mm & above.....
R 91.43
Ex VAT:R 79.50
Item No: SG BD-48
Airbrush propellant cap with valve
Propellant can be bought in a canister, which is h&y if a compressor isn't immediately
available. This cap screws onto the canister to control the flow of air & to
be able to shut it off when not in use.
The cap can be used to connect to either M5 or 1/8 BSP thread airbrush hose.....
R 66.53
Ex VAT:R 57.85
Item No: SG BD-480
Finger rest for nail art
The finger rest allows for stability, to keep the finger steady when
airbrushing it.
A great addition for the nail artist/technician.
....
R 21.22
Ex VAT:R 18.45
Item No: SG BD-A5
FITTING 1/8F X 1/4M....
R 42.67
Ex VAT:R 37.10
Item No: SG BD42
Nozzle cover for airbrush
Accidents happen when using an airbrush, when the airbrush has been dropped
& the nozzle is damaged, then this is the nozzle cover replacement for the
airbrush.....
R 22.54
Ex VAT:R 19.60
Item No: SG CP01
Airbrush cleaning pot
The cleaning pot can be used for 3 functions:
Cleaning residual paint in airbrush
White cap can be used as a water container or a palette
Airbrush holder
Use the correct solvent for the media used in the airbrush. Using the
cleaning pot correctly will result in a clean airbrush witho..
R 898.04
Ex VAT:R 780.90
Item No: SG F02
In-line filter for airbrushes
The filter can be directly connected to the airbrush to filter out dust & oil in the air.
The shape of the filter allows you to hold it located in your palm & by doing so, improves the comfort of holding the airbrush.
Easy to drain valve located on the bottom.
Filters out contaminants that could mix wit..
R 174.17
Ex VAT:R 151.45
Item No: SG HL04
Airbrush holder - fits on an inline regulator
Holds up to 2 airbrushes at a time.
Unscrew the red plastic locking ring on the top of the inline regulator to fit the airbrush holder. Perfect for airbrush compressors.....
R 107.76
Ex VAT:R 93.70
Item No: SG ADA01
Adaptor for 1/8 BSP airbrush hose
This adaptor allows for the braided 1/8 BSP airbrush hoses to connect to the
M5 thread on the SG A138 airbrush.....
R 29.56
Ex VAT:R 25.70
Item No: SG AH07
Compressor hose 1/4 x 1/4 BSP, 2.5m
long
This PVC hose is ideal to add a short length of 2.5m between an airbrush hose & the compressor
Max pressure: 10 bar....
R 144.27
Ex VAT:R 125.45
Item No: SG BD51-52
Airbrush hose tail for propellant
The connector is fitted on an airbrush to be connected to airbrush
propellant.
Many airbrushes already have this connector included in the scope of
delivery.
Can be connected to M5 & 1/8 BSP thread.....
R 45.37
Ex VAT:R 39.45
Item No: SG HL01
Airbrush holder - table edge clamp
Holds up to 4 airbrushes & clamps to a table edge.
Includes bracket to mount an inline air regulator.
Suitable for all kinds of
airbrushes.....
R 340.23
Ex VAT:R 295.85
Item No: SG HL02
Airbrush holder - table top with suction feet
Holds up to 4 airbrushes at a time.
The steel base has 4 suction cups to secure it on a smooth table top.
Suitable for all kinds of
airbrushes.....
R 340.23
Ex VAT:R 295.85
Item No: SG AH04
Airbrush hose 1/8 x 1/8 BSP, 3m
long
This spiral PVC hose is ideal for most airbrushes.
O-ring sealed to prevent leaks.....
R 126.33
Ex VAT:R 109.85
Item No: SG AH06
Airbrush braided hose 1/4 x 1/8 BSP, 3m
long
This hose has been woven tightly with nylon to be more durable.
O-ring seals have been fitted to prevent leaks.
Max pressure: 5.8 bar....
R 148.93
Ex VAT:R 129.50
Item No: SG BD-A1
Adaptor for 1/8 BSP airbrush hose
This adaptor allows for the braided 1/8 BSP airbrush hoses to connect to the M5 thread.....
R 42.67
Ex VAT:R 37.10
Item No: SG BD-A4
FITTING 1/4F X 1/8M....
R 42.67
Ex VAT:R 37.10
Item No: SG BD-A6
FITTING 1/4M X 1/4M....
R 42.67
Ex VAT:R 37.10
Item No: SG BD-A7
FITTING 1/8F X M5 M....
R 42.67
Ex VAT:R 37.10
Item No: SG E240
Airbrush spray booth with extractor
The high volume fan extracts overspray & reduces fumes from airbrushes. It is ideal for model builders, ceramics, R/C cars etc.
Includes plastic turn table....
R 2,795.48
Ex VAT:R 2,430.85
New Expected Date :
- 12/03/2025
Showing 1 to 30 of 30 (1 Pages)