Light Duty Woodworkers Vise
The
Light-Duty Bench Woodworker's Vise from Pony Tools is
intended for light-duty home & shop use.
The vise operates on an Acme thread
main screw & twin guide-bars made from plated steel. The jaw measures 6.5'
wide & has a maximum opening capacity of 4.5'.
The jaw also feat..
7 x 4 inch Woodworkers Vise (180 mm x 100 mm)
The Pony Woodworker's Vise is for medium duty home, shop or professional use. It is designed to mount to the side
face of wood work benches.
The top edges of the jaws are typically brought flush with the bench top. It will mount to the face of any wood work
bench but so..
4 Inch Pony Drill Press Vice (100 mm)
The
Pony Drill Press Vise is designed for the home workshop or professional workshop. This vise has two slots along each
side for ease of mounting to any drill press. Malleable cast iron with orange powered coated finish
Features:
The 4 inch opening capacity will allow the user t..
6 Inch Heavy Duty Bench Vise with Swivel Base
This
Pony Tools 6' Machinist's Bench Vise is an alternative to heavier duty bench vises but greater in strength than
light-duty vises.
Features:
The jaws are 6' wide & have a 6' opening capacity with 2-1/4' throat depth & 6' pipe jaw capacity. It features
harde..
2 1/2-Inch Light Duty Clamp On Vise (63.5 mm)
Pony
13025 2.5-Inch (63.5mm) Light Duty Clamp On Vise is designed for light duty home, shop & professional use. It is fully
portable yet mounts easily & securely on edges up to 2-inches (50mm) thick.
Features:
3-inch jaw width, 2-1/2 inch (63,5mm) opening capacity, ..
Pony Jorgensen 12″ Adjustable
H&screw - (305 mm)
Information
The 12″ Adjustable H&screw from Jorgensen holds tightly over broad areas & is designed to provide a large reach &
wide distribution of pressure.
Its jaws are made from seasoned hard maple & can be adjusted for holding materials of different widths & shapes.
Its spindles & nu..
5 Inch Quick-Release Bench Vise with Swivel Base
The
Pony Tools 5' Quick-Release Bench Vise with Swivel Base is designed to open & close with speed. A quick-release
lever disengages its screw so you can position your work with one h& while opening or closing the vise with your
other. Tighten the lever again so you can close ..
Vice & Drill Clamp Kit
Jaw Width: 78mm
Opening: 50mm
Horizontal rotation: 360°
Tilt: 0-90°
The vice can be fastened with the supplied screw onto the end of a workbench with a table thickness less than 50mm.
The vice is used to secure a workpiece within its jaws to allow work to be done on it.
....
Pony Press screws : 12" length
Pony heavy-duty press screws are ideal for making veneering frames & are especially useful for deep-reach surface
clamping. The large, removable cast-iron swivels make installation a breeze, & the threaded bushings fit easily into a
one-inch hole. 11/16-inch diameter, cold-drawn steel screws with sp..
5 inch Heavy-Duty Workshop Bench Vise with Swivel Base (127 mm)
This
Pony Tool 5' Machinist's Bench Vise is an alternative to heavier duty bench
vises but greater in strength than light-duty vises.
Features:
The jaws are 5' wide & have a 5' opening capacity with 2-1/4' throat depth & 5' pipe jaw capacity. It fe..
Pony Jorgensen 12″ Adjustable H&screw
Information
The 6 inch Adjustable H&screw from Jorgensen holds tightly over broad areas & is designed to provide a large reach &
wide distribution of pressure.
Its jaws are made from seasoned hard maple & can be adjusted for holding materials of different widths & shapes.
Its spindles & nuts ar..
Mini table vice
Jaw
width:
60mm
Opening: 40mm
Application:
The vice can be fastened with the supplied screw onto the end of a workbench.
The vice is used to secure a workpiece within its jaws to allow work to
be done on it.
NOTE:
Make sure the opening length is sufficient for the workpiece.....
Pony Press screws : 9" length
Pony heavy-duty press screws are ideal for making veneering frames & are especially useful for deep-reach surface
clamping. The large, removable cast-iron swivels make installation a breeze, & the threaded bushings fit easily into a
one-inch hole. 11/16-inch diameter, cold-drawn steel screws with spe..
Pony Press screws : 18" length
Pony heavy-duty press screws are ideal for making veneering frames & are especially useful for deep-reach surface
clamping. The large, removable cast-iron swivels make installation a breeze, & the threaded bushings fit easily into a
one-inch hole. 11/16-inch diameter, cold-drawn steel screws with sp..