Name: Festool HW 168x1,8x20 TF52 L LAMINATE/HPL Saw Blade 168mm 52T
Brand: FESTOOL
SKU: FES205766
Price: 4621.85 ZAR
Availability: InStock

Festool HW 168x1,8x20 TF52 L LAMINATE/HPL Saw Blade 168mm 52T

Festool HW 168x1,8x20 TF52 L LAMINATE/HPL Saw Blade 168mm 52T

Based on 0 reviews. - Write a review

Price

R 4,621.85

Ex VAT: R 4,019.00

Item No: FES205766
Weight: 0.29kg
Dimensions: 235.00mm x 217.00mm x 11.00mm
SKU: FES205766
UPC: 4014549390399

Available Options

Ask Question Ask Question

Add to Wish List

Tags: FES205766 , HW 168x1 , 8x20 TF52 L , LAMINATE/HPL Saw Blade , TS 60 Saw Blade , TSV 60 Saw Blade , CSC SYS 50 Saw Blade , 168mm Saw Blade , 52 Tooth Saw Blade

Festool HW 168x1,8x20 TF52 L LAMINATE/HPL Saw Blade

At a Glance: Specialist 168mm, 52-tooth carbide saw blade with trapezoidal/flat tooth geometry and a slightly negative rake angle for precise cutting in laminate, coated panels, acrylic glass, melamine resin boards and mineral materials.

Achieve clean, accurate cuts in demanding laminated and coated materials with the Festool HW 168x1,8x20 TF52 L LAMINATE/HPL Saw Blade. Designed specifically for the Festool TS 60 K, TSV 60 K and CSC SYS 50, the blade combines a reduced 1.8mm cutting width with 52 fine-grain carbide-tipped teeth for efficient cutting and consistently high edge quality. Its trapezoidal/flat tooth geometry is optimised for plastic-based and highly abrasive panel materials, while the slightly negative -5° chip angle supports a long service life when cutting hard plastics. The application-specific tooth form, cutting angle and blade dimensions provide dependable performance in laminate, HPL, acrylic glass, coated boards, melamine resin panels and mineral materials.

Specialised cutting performance for demanding panel materials

The TF trapezoidal/flat tooth arrangement alternates between teeth that pre-cut the material surface and teeth that remove the remaining material. This geometry supports controlled cutting and clean finished edges in hard, brittle and surface-coated materials.

Product Highlights

Application-specific LAMINATE/HPL blade: Developed for accurate processing of laminated, coated and plastic-based materials.
52 fine-grain carbide teeth: Provides excellent cutting quality and dependable service life.
Trapezoidal/flat tooth geometry: Designed for clean cutting in hard plastics, laminates and abrasive panel materials.
Slightly negative rake angle: The -5° chip angle promotes controlled cutting and long service life in very hard plastics.
Reduced cutting width: The 1.8mm kerf supports fast, efficient cutting with reduced material removal.
Precisely matched to Festool saws: Designed for the TS 60 K, TSV 60 K and CSC SYS 50.
Durable carbide construction: Fine-grain carbide-tipped teeth maintain consistent cutting quality over an extended working life.
Clear Festool colour coding: Makes it easier to identify and select the correct blade for the intended material.
Versatile material range: Suitable for laminate, coated panels, acrylic glass, melamine resin boards and mineral materials.

Extra Information

The official Festool product designation is HW 168x1,8x20 TF 52.
The blade is designed for the Festool TS 60 K, TSV 60 K and CSC SYS 50.
It has a 168mm outside diameter and a 20mm mounting bore.
The blade features 52 fine-grain carbide-tipped teeth.
The TF tooth geometry consists of trapezoidal and flat teeth for processing plastic-related materials.
The cutting width is 1.80mm and the standard blade-body thickness is 1.20mm.
The slightly negative chip angle is -5°.
The blade has a relief angle of 20°.
It is suitable for laminate, HPL, coated panels, acrylic glass, melamine resin boards and mineral materials.
It can also be used for suitable phenolic-resin-bonded fibres and fabrics.
The saw, guide rail, dust extractor and other accessories are not included.

Pro Tips

Support large panels fully to prevent movement, vibration or surface damage during cutting.
Place the visible face according to the saw&s cutting direction to minimise breakout on the finished surface.
Use a guide rail or correctly adjusted fence where applicable to maintain a straight and accurate cut.
Set the cutting depth only slightly deeper than the workpiece to improve control and reduce unnecessary blade exposure.
Use a steady feed rate and allow the blade to cut without excessive forward pressure.
Make a test cut in an offcut when working with an unfamiliar laminate, plastic or mineral material.
Use suitable dust extraction to maintain visibility and reduce airborne dust.
Clean adhesive and resin residue from the teeth regularly, as build-up can increase heat and reduce cutting quality.
Have the blade professionally sharpened when increased feed pressure, burning or excessive chipping becomes noticeable.
Use a suitable splinter guard when the compatible machine and application allow it.

How to Use

Switch off the saw and disconnect it from the mains supply or remove its battery packs.
Allow the installed blade to stop completely before beginning the blade change.
Inspect the replacement blade for cracks, distortion, damaged teeth or excessive contamination.
Confirm that the 168mm diameter, 20mm bore and 1.80mm cutting width are suitable for the machine.
Remove the existing blade according to the operating instructions supplied with the saw.
Clean the arbor, flange and blade-contact surfaces.
Fit the HW 168x1,8x20 TF52 L blade with its rotation arrow matching the direction marked on the saw.
Install and tighten the blade flange and retaining hardware according to the prescribed machine procedure.
Confirm that the blade is seated correctly and rotates freely without contacting guards or other components.
Reconnect or reinstall the power source only after the blade compartment is closed correctly.
Connect suitable dust extraction where applicable.
Set the required cutting depth and position the guide rail, fence or workpiece guide.
Support and secure the material so it cannot shift or close on the blade during cutting.
Start the saw and allow the blade to reach full operating speed.
Guide the saw or feed the workpiece smoothly and evenly without forcing the cut.
Complete the cutting pass and move the blade clear of the workpiece.
Switch off the saw and wait for the blade to stop completely before making adjustments or removing offcuts.

Features

168mm blade diameter: Correctly sized for compatible Festool TS 60 K, TSV 60 K and CSC SYS 50 saws.
20mm mounting bore: Provides the specified fit on the compatible machine arbor.
52-tooth configuration: Supports precise, high-quality cutting in brittle and surface-coated materials.
TF tooth shape: Trapezoidal and flat teeth work together to machine demanding plastic and laminate materials cleanly.
-5° chip angle: Provides controlled cutting characteristics and enhanced service life in hard plastics.
20° relief angle: Contributes to efficient clearance behind the cutting edge.
1.80mm cutting width: Reduces material removal while maintaining precise cutting performance.
1.20mm blade-body thickness: Combines a narrow kerf with the stability required for accurate cutting.
Fine-grain carbide teeth: Offer reliable durability and consistent cutting quality under demanding conditions.
High-quality steel body: Supports stable running and accurate professional results.

Benefits

Cleaner finished edges: The high tooth count and TF geometry help minimise chipping on visible laminated and coated surfaces.
Efficient cutting: The reduced 1.8mm cutting width allows the compatible saw to work quickly while removing less material.
Long service life: Fine-grain carbide teeth and the slightly negative chip angle withstand hard and abrasive materials.
Consistent cutting quality: The blade geometry is precisely coordinated with the compatible Festool machines.
Reduced finishing work: Clean cuts can minimise subsequent sanding, filing and edge correction.
Controlled material feed: The -5° chip angle supports smooth, manageable cutting in hard plastic-based materials.
Versatile panel processing: One specialist blade covers laminate, coated boards, acrylic glass and several resin-based materials.
Easy blade selection: Festool colour coding helps prevent the use of an unsuitable blade for the application.
Complete system compatibility: The diameter, bore, kerf and tooth geometry are matched to the specified Festool saws.

Application

Cutting laminate and high-pressure laminate panels.
Machining coated furniture and cabinet boards.
Cutting melamine resin boards such as Trespa®.
Processing acrylic glass and suitable plastic materials.
Cutting mineral materials.
Machining phenolic-resin-bonded fibres and fabrics.
Sizing kitchen, wardrobe and furniture components.
Cabinetmaking, joinery and shopfitting applications.
Interior installation and precision panel processing.

Safety

Wear suitable eye, hearing and respiratory protection while cutting.
Disconnect the saw from the mains supply or remove its battery packs before fitting, removing, cleaning or inspecting the blade.
Use the blade only with the Festool TS 60 K, TSV 60 K or CSC SYS 50 and within the machine&s specified operating limits.
Inspect the blade before every use and do not use it if teeth are cracked, loose, missing or damaged.
Do not use a blade that is bent, distorted, heavily contaminated or excessively worn.
Install the blade in the correct rotational direction and tighten the retaining hardware securely.
Ensure all guards and safety devices are fitted and functioning correctly before starting the saw.
Support and secure the workpiece so that it cannot move, twist or close on the blade.
Keep hands away from the cutting line and use suitable workpiece guides or push devices where required.
Do not force the saw or workpiece through the cut.
Do not cut material containing hidden screws, nails or other metal objects.
Use effective dust extraction and follow the material manufacturer&s safety precautions.
Take particular care when cutting mineral or resin-bonded materials that may produce hazardous dust.
Allow the blade to stop completely before removing offcuts, making adjustments or setting the saw down.
Do not touch the blade immediately after cutting, as it may be hot.
Follow all operating and safety instructions supplied with the saw blade, compatible saw and extraction system.

Specifications

Description	Spec
Brand	Festool
Cat No.	FES205766
Model	HW 168x1,8x20 TF 52
Product Type	LAMINATE/HPL Circular Saw Blade
Compatible Machines	Festool TS 60 K, TSV 60 K and CSC SYS 50
Blade Diameter	168mm
Cutting Width	1.80mm
Standard Blade Thickness	1.20mm
Bore Diameter	20mm
Number of Teeth	52
Tooth Shape	TF – Trapezoidal/Flat Tooth
Chip Angle	-5°
Relief Angle	20°
Tooth Material	Fine-Grain Carbide
Blade-Body Material	High-Quality Steel
Suitable Materials	Laminate, HPL, Coated Panels, Acrylic Glass, Melamine Resin Boards, Mineral Materials and Phenolic-Resin-Bonded Materials
Primary Application	Precision Cutting of Laminated, Coated and Plastic-Based Materials