Bearing Lock Medium Strength For Std Sized Cylindrical Parts - Yellow

Extra Information

• Use only on clean, oil-free metal parts — surfaces must be degreased before adhesive application for proper curing and bonding.
• Apply adhesive to both mating surfaces before assembly for best capillary distribution and strength.
• Parts can be handled after approx. 40 minutes; full strength develops in about 120 minutes.
• Not suitable for non-metal materials such as plastic, wood or rubber — only for metal cylindrical parts (brass, zinc, steel).
• Store adhesive in a cool, dry place and ensure cap is firmly closed after use to prevent premature curing.

Features

• Medium-strength anaerobic adhesive — bonds metal cylindrical parts while allowing later disassembly if needed
• Suitable for brass, zinc and steel — compatible with common bearing and shaft materials
• Low-viscosity formulation for good capillary action and even distribution between tight metal fits
• 50 g size — enough for multiple bearing or bushing assemblies
• Cures without air exposure — sets rapidly between close-fitting metal surfaces

Benefits

• Secure bearing/shaft fit: prevents movement, loosening or slippage of bearings, bushes or sleeves under load or vibration.
• Maintains serviceability: medium strength allows future maintenance or part replacement without destructive removal.
• Reliable retention under mechanical stress: ideal for rotating shafts, couplings, motor assemblies, gearboxes and other mechanical joints.
• Cleaner, seal-friendly joint: fills microscopic gaps between metal surfaces and can help reduce leakage in housings where lubricant or grease is used.
• Versatile for workshop use: useful for repair, maintenance, retrofits or initial assembly in metalworking and machinery maintenance tasks.

Safety

• Work in a well-ventilated area when applying adhesive, and avoid inhaling vapours.
• Wear protective gloves to avoid skin contact; avoid contact with eyes. If contact occurs, rinse thoroughly with water.
• Keep out of reach of children and store sealed in a cool, dry place away from direct heat or flame.
• Do not use on wet, oily or dirty metal surfaces — ensure parts are clean and dry before application.
• Dispose of empty container according to local waste-disposal regulations for chemical products.

Specifications