Pressure
filter regulator for compressed air
Type FR180 (10 Bar)
The FR180 Compressed Filter Regulator is a tool designed to
filter & regulate air flow with jettisoning & protection cup.
The cup has a fluid capacity if 30 ml.
Range of regulator: 0 - 10 Bar
It has a maximum inlet pressure of 12 Bar & a
filtering of 10 ....
Pressure
filter regulator for compressed air
Type FR300 (16 Bar)
The FR300 Compressed Filter Regulator is a tool designed to
filter & regulate air flow with jettisoning & protection cup.
The cup has a fluid capacity if 150 ml.
Range of regulator: 0 - 12 Bar
It has a maximum inlet pressure of 16 Bar & a
filtering of 10....
Oil mist lubricator with protection cup
Type L180 (12 Bar)
The L180 Oil mist lubricator by GAV, is intended for compressed air applications. This accessory operates with a maximum inlet pressure of 12 bar on a 2.200 Nl/min 6 bar range. In addition, it is equipped with a protection cup & is capable of holding a cup capacity of 40 ml.
....
Oil mist lubricator with protection cup
Type L300 (16 Bar)
The L300 Oil mist lubricator by GAV, is intended for compressed air applications. This accessory operates with a maximum inlet pressure of 16 bar on a
9000 Nl/min 6 bar range. In addition, it is equipped with a protection cup & is capable of holding a cup capacity of
170 m....
Mini
Drain 50 electronic drain
Model GAV MD50
Remove the condensate
The MiniDrain consists of a servo-assisted solenoid valve that opens upon the comm& of an electronic circuit according to
drain capacity. Drain capacity is preset by means of a knob located on the control panel.
Regulation is extremely user's
friendly thanks to a s..
In-line filter for spray guns
The filter can be directly connected to the spray gun to filter out dust & oil in the air.
It is mainly suitable for spray guns using compressed air as it needs to be
positioned upright to function properly.
Easy to drain valve located on the bottom.
Supplied in hanging box.
Thread: 1/4 BSP....
In-line filter 1/2 BSP
In-line water traps/filters are necessary to separate water & oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Manual
A push-in fitting is located on the dr..
In-line filter & regulator 1/4 BSP
In-line water traps/filters are necessary to separate water & oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
Visible arrows are on the outer body of the casing tha....
In-line filter & regulator 1/2 BSP
In-line water traps/filters are necessary to separate water & oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
Visible arrows are on the outer body of the casing tha....
Three Stage Filter Without Gauge
Stages: Sinter, Fine & Carbon
A three-stage filter system, composed of sinter, fine, & carbon filters, is designed to effectively remove
impurities from air or liquid. While gauges are often used to monitor filter performance, this system can function
without them.
1. Sinter Filter
P....
Pressure
filter for compressed air
Type F200 (16 Bar)
The F-200 Compressed Filter is a tool designed with jettisoning & protection cup.
The cup has a fluid capacity if 50 ml.
It has a maximum inlet pressure of 16 bar & a
filtering of 10 micron.
Moreover, this compressed filter has a maximum working pressure of 6000 Nl/....
Pressure
filter for compressed air
Type F300 (16 Bar)
The F-300 Compressed Filter is a tool designed with jettisoning & protection cup.
The cup has a fluid capacity if 150 ml.
It has a maximum inlet pressure of 16 bar & a
filtering of 10 micron.
Moreover, this compressed filter has a maximum working pressure of 9000 Nl....
Pressure
filter regulator for compressed air
Type FR200 (16 Bar)
The FR200 Compressed Filter Regulator is a tool designed to
filter & regulate air flow with jettisoning & protection cup.
The cup has a fluid capacity if 50 ml.
Range of regulator: 0 - 12 Bar
It has a maximum inlet pressure of 16 Bar & a
filtering of 10 ....
Modular
filter/regulator/lubricator
Type FRL180
Regulator range: 0 - 10 Bar
It has a maximum inlet pressure of 12 bar
Filtration: 10 micron
Maximum flow rate of 1800 Nl/min at 6 bar.
Manometer included.
Regulator with control knob with lock.
Made
in Italy
1/4 inch BSP female thread
both sides
....
Oil mist lubricator with protection cup
Type L200 (16 Bar)
The L200 Oil mist lubricator by GAV, is intended for compressed air applications. This accessory operates with a maximum inlet pressure of 16 bar on a
6000 Nl/min 6 bar range. In addition, it is equipped with a protection cup & is capable of holding a cup capacity of
170 m....
In-line filter 1/2 BSP
In-line water traps/filters are necessary to separate water & oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain....
In-line filter, regulator & lubricator 1/4 BSP
In-line water traps/filters are necessary to separate water & oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes & mixes pneumatic ....