Item No: TC08414
Grinding point - Ø 25.4mm - Wheel
The point is made of bonded aluminium oxide.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 21.10
Ex VAT:R 18.35
Item No: TC08415
Grinding point - Ø 4mm - Cylindrical
The point is made of bonded aluminium oxide.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 21.10
Ex VAT:R 18.35
Item No: TC08418
Chainsaw sharpening stone - Ø 4.8mm
The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutting corner on a chainsaw blade.
Simply colour-in the side plate's bevel with a permanent marker and align the sharpening stone with the bevel and only remove the coloured in areas to reveal a new ..
R 18.06
Ex VAT:R 15.70
Item No: TC08421
Grinding point - Ø 12.7mm - Round point
The point is made of bonded aluminium oxide.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 1
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 26.85
Ex VAT:R 23.35
Item No: TC08422
Grinding point - Ø 12.7mm - Round point
The point is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smoothing/finishing
Carving
It can also be used ..
R 26.85
Ex VAT:R 23.35
Item No: TC08423
Grinding point - Ø 7mm - Cylindrical
The point is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smoothing/finishing
Carving
It can also be used on ..
R 26.85
Ex VAT:R 23.35
Item No: TC08426
Sanding drum mandrel - Ø 12.7mm
The mandrel is used with Ø 12.7mm sanding drums for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.....
R 26.85
Ex VAT:R 23.35
Item No: TC08432
P240 Drum sanding sleeves - Ø 6.4mm
The Ø 6.4mm sanding drums are used for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the
TC08425 mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.
QTY: 12
Grit: P240....
R 51.00
Ex VAT:R 44.35
New Expected Date :
- 30/10/2024
Item No: TC08440
Rotary flap grinding wheel - P120
For grinding and polishing metals, rubber and plastics.
Can be used on flat or contoured surfaces.
The flap sanding wheel can also be used for rust removal.
Grit: P120....
R 33.01
Ex VAT:R 28.70
Item No: TCMT001DC
Chuck for TCMT001 rotary tool
Application:
The chuck is used to replace the collet clamping system of the TCMT001 rotary
tool. The clamping range is Ø0.3-3.2mm.
TCMT001 accessories:
TCMT001DC
Drill chuck 0-3.2mm
TCMT001FS
Flexible shaft
TCMT001SS
Telescopic hanging hook stand with ..
R 147.03
Ex VAT:R 127.85
Item No: TCMT001SS
Telescopic stand for TCMT001 rotary tool
Application:
The telescopic hanging hook stand is fitted to a desk clamp and it can be
adjusted in height. It is ideally used together with the flexible shaft (TCMT001FS).
The rotary tool is hung on the hook of the stand to keep the tool safely out
of the way. It also minimizes the chance for the ..
R 436.54
Ex VAT:R 379.60
Item No: TCMT005
Engraver
Engraver: TCMT005
Application:
The engraver is supplied with two stencils. The stencils allow letters and
numbers to be accurately engraved on plastics and metals.
The engraver is
popularly used to engrave serial numbers or details on equipment.
The engraver's intensity can be adjusted depending on the material it is
bein..
R 459.89
Ex VAT:R 399.90
Item No: TCW006-4
WIRE BRUSHES MINI 5PC STAINLESS STEEL 3.2mm SHAFT ASSORTED SHAPES....
R 85.50
Ex VAT:R 74.35
Item No: TCW006-5
WIRE BRUSHES MINI 5PC BRASS 3.2mm SHAFT ASSORTED SHAPES....
R 83.84
Ex VAT:R 72.90
Item No: TC08445
MINI COTTON YARN DISC 24MM 2.35MM SHANK....
R 33.41
Ex VAT:R 29.05
Item No: TCMT007
TorkCraft - Mini Rotary Tool Kit
QTY:
6 Piece
Application:
The Tork Craft Mini Rotary Kit is great for small scale projects such as carving and engraving, light weight, slim design with a 2.3mm colet. Battery operrated (2 x AAA batteries)
Light weight
Slim design
2.3mm Colet
Battery Opperated
Great for carving a..
R 278.82
Ex VAT:R 242.45
Item No: M1065
Steel engraving cutter - Ø 7.8mm - Oval
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
Carving
Engraving
Routing
It is suitable for engraving on the following materials:
Wood
Fiberglass
Soft metals
Plaster
Pl..
R 229.89
Ex VAT:R 199.90
Item No: M1080
Steel engraving cutter - Ø 2.3mm - Cylindrical
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
Carving
Engraving
Routing
It is suitable for engraving on the following materials:
Wood
Fiberglass
Soft metals
Plast..
R 146.91
Ex VAT:R 127.75
Item No: M1105
Steel engraving cutter - Ø 7.8mm - Cylindrical
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
Carving
Engraving
Routing
It is suitable for engraving on the following materials:
Wood
Fiberglass
Soft metals
Plast..
R 229.89
Ex VAT:R 199.90
Item No: M1120
Steel engraving cutter - Ø 1.4mm - Reverse taper
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
Carving
Engraving
Routing
It is suitable for engraving on the following materials:
Wood
Fiberglass
Soft metals
Pla..
R 171.47
Ex VAT:R 149.10
Item No: M1140
Steel engraving cutter - Ø 4mm - Reverse taper
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
Carving
Engraving
Routing
It is suitable for engraving on the following materials:
Wood
Fiberglass
Soft metals
Plast..
R 142.83
Ex VAT:R 124.20
Item No: M1190
Steel engraving cutter - Ø 4mm - Flame
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
Carving
Engraving
Routing
It is suitable for engraving on the following materials:
Wood
Fiberglass
Soft metals
Plaster
Pla..
R 142.83
Ex VAT:R 124.20
Item No: M1240
Steel engraving cutter - Ø 6mm - Conical
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
Carving
Engraving
Routing
It is suitable for engraving on the following materials:
Wood
Fiberglass
Soft metals
Plaster
P..
R 142.83
Ex VAT:R 124.20
Item No: M1375
Steel engraving cutter - Ø 9.5mm - Wheel
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
Carving
Engraving
Routing
It is suitable for engraving on the following materials:
Wood
Fiberglass
Soft metals
Plaster
P..
R 171.47
Ex VAT:R 149.10
Item No: M1520
Tungsten carbide cutter - Ø 3mm - Spherical
The tungsten carbide cutter has greater edge retention when compared to a steel cutter and can be used for material removal, shaping and smoothing
on hard materials.
The cutter can be used on the following materials:
Hardened and stainless steel
Cast iron
Non-ferrous metals
Fired..
R 550.68
Ex VAT:R 478.85
Item No: M1550
Tungsten carbide cutter - Ø 3mm - Cylindrical
The tungsten carbide cutter has greater edge retention when compared to a steel cutter and can be used for material removal, shaping and smoothing
on hard materials.
The cutter can be used on the following materials:
Hardened and stainless steel
Cast iron
Non-ferrous metals
Fir..
R 550.68
Ex VAT:R 478.85
Item No: M1935
Diamond point - Ø 3.2mm - Cylindrical
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals....
R 119.14
Ex VAT:R 103.60
Item No: M2130
Ruby grinding point - Ø 6mm - Bullet
The point is made of bonded aluminium oxide and has a distinctive ruby colour.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 129.38
Ex VAT:R 112.50
Item No: M2160
Ruby grinding point - Ø 6mm - Spherical
The point is made of bonded aluminium oxide and has a distinctive ruby colour.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 129.38
Ex VAT:R 112.50
Item No: M2220
Ruby grinding point - Ø 10mm - Cylindrical cone
The point is made of bonded aluminium oxide and has a distinctive ruby colour.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 129.38
Ex VAT:R 112.50
Item No: M2410
Grinding point - Ø 3mm - Conical
The point is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smoothing/finishing
Carving
It can also be used on non..
R 142.83
Ex VAT:R 124.20
Item No: M2435
Grinding point - Ø 4mm - Spherical
The point is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smoothing/finishing
Carving
It can also be used on n..
R 142.83
Ex VAT:R 124.20
Item No: M2450
Grinding point - Ø 8mm - Reverse taper
The point is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smoothing/finishing
Carving
It can also be used ..
R 142.83
Ex VAT:R 124.20
Item No: M2630
White grinding wheel - Ø 22mm -
The wheel is designed not to be aggressive when grinding and is commonly referred to as a 'cold sharpening' wheel.
Great for honing a sharp edge.
QTY: 2
Use mandrel
M8100 with the grinding wheel
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 72.05
Ex VAT:R 62.65
Item No: M2640
Brown grinding wheel - Ø 22mm -
The wheel is designed for grinding steel alloys.
QTY: 2
Use mandrel
M8100 with the grinding wheel....
R 72.05
Ex VAT:R 62.65
Item No: M3020
Rotary flap grinding wheel - P80
For grinding and polishing metals, rubber and plastics.
Can be used on flat or contoured surfaces.
The flap sanding wheel can also be used for rust removal.
Grit: P80....
R 171.47
Ex VAT:R 149.10
Item No: M3030
Rotary flap grinding wheel - P80
For grinding and polishing metals, rubber and plastics.
Can be used on flat or contoured surfaces.
The flap sanding wheel can also be used for rust removal.
Grit: P80....
R 129.38
Ex VAT:R 112.50
Item No: M3210
Ø 20mm rubber backing pad with 6 PSA sanding discs
The sanding discs are known as PSA (Pressure Sensitive Adhesive) discs.
Simply stick the required grit to the backing pad to sand, grind or shape wood, plastic and rubber surfaces.
The sanding discs can also be used for rust removal.
Grit: Assorted range from P100 - P220
QTY di..
R 115.12
Ex VAT:R 100.10
Item No: M3610
Sanding drum mandrel - Ø13mm
The mandrel is used with Ø 13mm sanding drums for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.
Use the following sanding drums:
M36..
R 90.62
Ex VAT:R 78.80
Item No: M3640
Sanding drum mandrel - Ø 9.5mm
The mandrel is used with Ø 9.5mm sanding drums for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.
Use the following sanding drums:
..
R 90.62
Ex VAT:R 78.80
Item No: M3650
P60 Drum sanding sleeves - Ø 9.5mm
The Ø 9.5mm sanding drums are used for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the
M3640 mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.
QTY: 12
Grit: P60....
R 115.12
Ex VAT:R 100.10
Item No: M4020
Steel wire brush set - 3 PC
The steel wire end brush is great for cleaning or deburring metal and plastic.
It can also be used for removing rust/corrosion and cleaning welds.
The wire brushes can also be used to create an artistic effect on soft wood. The wire brush removes the soft wood to expose the coarse grained growth rings.
..
R 223.79
Ex VAT:R 194.60
Item No: M4055
Brass wire end brush - Ø 5mm
The brass wire end brush is great for cleaning or deburring soft metals like gold, copper and brass without scratching.
It can also be used for cleaning electrical components.
The shape allows for use in hard-to-reach areas.
QTY: 1....
R 73.08
Ex VAT:R 63.55
Item No: M4060
Brass wire cup brush - Ø 12mm
The brass wire end brush is great for cleaning or deburring soft metals like gold, copper and brass without scratching.
It can also be used for cleaning electrical components.
The shape allows for use in hard-to-reach areas.
QTY: 1....
R 122.36
Ex VAT:R 106.40
Item No: M4105
Black bristle wire end brush - Ø
5mm
The black bristle wire end brush is great for cleaning or light deburring and polishing.
Particularly ideal for silverware, jewelry and other precious metals.
The shape allows for use in hard-to-reach areas.
QTY: 1....
R 62.91
Ex VAT:R 54.70
Item No: M4115
Black bristle wire wheel brush - Ø
21mm
The black bristle wire wheel brush is great for cleaning or light deburring and polishing.
Particularly ideal for silverware, jewelry and other precious metals.
The shape allows for use in hard-to-reach areas.
QTY: 1....
R 87.40
Ex VAT:R 76.00
Item No: M4160
White nylon wire cup brush - Ø
12mm
The white nylon wire cup brush is great for cleaning and polishing precious metals and other delicate surfaces.
The shape allows for use in hard-to-reach areas.
QTY: 1....
R 104.82
Ex VAT:R 91.15
Item No: M4165
White nylon wire wheel brush - Ø
21mm
The white nylon wire wheel brush is great for cleaning and polishing precious metals and other delicate surfaces.
The shape allows for use in hard-to-reach areas.
QTY: 1....
R 87.40
Ex VAT:R 76.00
Item No: M4510
Rubber polishing point - Ø
5mm - Bullet shaped
Great for removing light scratch and grinding marks on metals.
Can be used to remove imperfections on ceramic and most stones.
QTY: 1....
R 104.82
Ex VAT:R 91.15
Item No: M4595
Rubber polishing wheel - Ø
22mm
Great for removing light scratch and grinding marks on metals.
Can be used to remove imperfections on ceramic and most stones.
QTY: 2
Use mandrel
M8100 with the polishing wheel....
R 84.35
Ex VAT:R 73.35