Item No: M8560
Keyless chuck for thread 9/32 x 40
The keyless chuck is used to hold accessories with a shank diameter between &O/; 0.4-3.2mm.....
R 450.34
Ex VAT:R 391.60
Item No: PG550
FLEXIBLE SHAFT 6MM CHUCK 900MM LONG 6MM CHUCK....
R 1,460.10
Ex VAT:R 1,269.65
Item No: PG555
FLEXIBLE SHAFT DIY 8MM CHUCK....
R 1,738.46
Ex VAT:R 1,511.70
Item No: TC08391
Replacement collet - &O/; 0.8mm
The collet is used to hold mini rotary accessories with a shank diameter of &O/; 0.8mm....
R 23.98
Ex VAT:R 20.85
Item No: TC08392
Replacement collet - &O/; 1.6mm
The collet is used to hold mini rotary accessories with a shank diameter of &O/; 1.6mm....
R 23.98
Ex VAT:R 20.85
Item No: TC08395
Collet wrench
The collet wrench is used to securely tighten the collet nut or multi chuck, locking the mini rotary accessory in place.
The back end of the wrench has a flat tip screwdriver that can be used to change accessories on the mini rotary m&rels.....
R 12.02
Ex VAT:R 10.45
Item No: TCMT001-2-3-1
Flexible shaft for TCMT001 rotary tool
Collet diameter: &O/;3.2mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also be used to substitute the use of a collet.
TCMT0..
R 36.00
Ex VAT:R 31.30
Item No: TCMT001-2-3-2
Flexible shaft for TCMT001 rotary tool
Collet diameter: &O/;2.3mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also be used to substitute the use of a collet.
TCMT0..
R 36.23
Ex VAT:R 31.50
Item No: TCMT001-2-3-3
Flexible shaft for TCMT001 rotary tool
Collet diameter: &O/;1.6mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also be used to substitute the use of a collet.
TCMT0..
R 36.00
Ex VAT:R 31.30
Item No: TCMT001FS
Flexible shaft for TCMT001 rotary tool
Application:
The flexible shaft is used to eliminate the weight from the rotary tool. It
is also more comfortable to use as the h&le resembles a pen.
Consider using
the telescopic hanging hook st& (TCMT002SS) together with the flexible shaft.
IMPORTANT:
Do not have loops in the flexible shaf....
R 300.90
Ex VAT:R 261.65
Item No: TCMT005-01
REPLACEMENT TIP 3MM (2PC) FOR TORK CRAFT ELECTRIC ENGRAVER (TCMT005)....
R 64.29
Ex VAT:R 55.90
New Expected Date :
- 15/04/2025
Item No: M8010
Collet set for thread 8 x 0.75
The collet set is used to hold the corresponding shank diameter.
Collets included in the set:
&O/; 1.00mm
&O/; 1.50mm
&O/; 2.35mm
&O/; 3.00mm
&O/; 3.20mm
Collet nut included for 8 x 0.75 thread....
R 241.27
Ex VAT:R 209.80
Item No: M8020
Collet set for thread 9/32 x 40
The collet set is used to hold the corresponding shank diameter.
Collets included in the set:
&O/; 0.80mm
&O/; 2.35mm
&O/; 3.00mm
&O/; 3.20mm
Collet nut included for 9/32 x 40 thread....
R 206.31
Ex VAT:R 179.40
Item No: M8500
FLEXIBLE DRIVE SHAFT.80CM WITH 25MM COLLET....
R 592.25
Ex VAT:R 515.00
Item No: M8550
Keyless chuck for thread 8 x 0.75
The keyless chuck is used to hold accessories with a shank diameter between &O/; 0.4-3.2mm.....
R 432.75
Ex VAT:R 376.30
Item No: PG560
FLEXIBLE SHAFT PROFESSIONAL 8MM CHUCK....
R 1,871.97
Ex VAT:R 1,627.80
Item No: TCMT001DC
Chuck for TCMT001 rotary tool
Application:
The chuck is used to replace the collet clamping system of the TCMT001 rotary
tool. The clamping range is &O/;0.3-3.2mm.
TCMT001 accessories:
TCMT001DC
Drill chuck 0-3.2mm
TCMT001FS
Flexible shaft
TCMT001SS
Telescopic hanging hook st& with..
R 147.03
Ex VAT:R 127.85
Item No: TCMT001SS
Telescopic st& for TCMT001 rotary tool
Application:
The telescopic hanging hook st& is fitted to a desk clamp & it can be
adjusted in height. It is ideally used together with the flexible shaft (TCMT001FS).
The rotary tool is hung on the hook of the st& to keep the tool safely out
of the way. It also minimizes the chance for the fle....
R 436.54
Ex VAT:R 379.60
Item No: M8750
UNIVERSAL MINI VICE 45X50MM....
R 470.70
Ex VAT:R 409.30
Item No: TC08390
Quick change collet kit
The quick change collet allows you to fit the following collet diameters:
&O/; 0.8mm
&O/; 1.6mm
&O/; 2.4mm
&O/; 3.2mm
Make sure to tighten the collet nut with a collet wrench.....
R 77.74
Ex VAT:R 67.60
Item No: TC08393
Replacement collet - &O/; 3.2mm
The collet is used to hold mini rotary accessories with a shank diameter of &O/; 3.2mm....
R 23.98
Ex VAT:R 20.85
Item No: TC08394
Multi chuck - &O/; 0.8mm - 3.2mm
The multi chuck is ideal for mini & micro drill bits, to secure hold different diameter accessories from &O/; 0.8mm up to &O/; 3.2mm....
R 98.67
Ex VAT:R 85.80
Item No: TCMT001DA
MINI ROTARY TOOL ATTACHMENT FOR TCMT001 WITH DEPTH ADJUSTMENT TO 19MM....
R 81.82
Ex VAT:R 71.15
Showing 1 to 23 of 23 (1 Pages)