
- Item No: CKP10MM
- Weight: 0.04kg
- Dimensions: 138.00mm x 80.00mm x 35.00mm
- SKU: CKP10MM
- UPC: 6009675085354
Available Options
- 31/10/2025
- 15/02/2026
Cutting Diameter: 10mm
Classification: Standard (Yellow)
The Two-Flute Straight Router Bit is an indispensable tool for woodworkers and fabricators requiring a blend of speed and superior finish in their straight-line cutting operations.
Featuring two balanced, opposing cutting edges measured in precise metric diameters, this bit offers reduced vibration and a smoother cut compared to single-flute alternatives. The dual-flute design ensures that two cutting strikes occur per revolution, leading to a much cleaner finish on the material surface and edges.
This robust bit is ideally suited for creating high-quality, professional grooves, dadoes, rabbets, and precise edge-trimming in a wide range of materials, including hardwoods, softwoods, plywood, and various composite sheets, making it a highly versatile and essential addition for both table-mounted and handheld metric routing applications.
Application:
- Router bits are for use with router machines only.
- Be sure that at least 3/4 of the shaft length is inserted into the router collet.
- Do not 'bottom-out' the bit in the collet. The shank should be 1/8' from the bottom of the collet.
- Route in two or more passes when large amounts of stock must be removed.
- Carpenters
- Craftsmen
- Hobbyists
- Woodworking
- DIY
Extra Information
- Make multiple shallow passes for deep cuts; clear chips between passes.
- Match RPM and feed rate to material to avoid burning.
- Ensure the bit is seated correctly and the collet is tight before use.
- Use fences, guides or templates for straight, repeatable results.
Pro Tip
- When routing across end grain, score the shoulder with a knife or make a light climb-cut pass to reduce breakout, then finish with a standard pass.
- For mortises, plunge in stair-steps and side-clear to full width — this keeps the bit cooler and the floor flatter.
Features
- Straight profile for flat-bottom, square-walled cuts.
- 10 mm diameter — versatile for dados, slots and clean recesses.
- Precision-ground cutting edges for smooth finish and reduced tear-out.
- Robust body for stable tracking with less chatter.
- Router collet compatible (use a correctly sized collet for the shank).
Benefits
- Clean finish: sharp, square grooves with minimal sanding.
- Reliable accuracy: holds line well in jigs and templates.
- Versatile use: handles joinery and general routing tasks.
Safety
- Wear eye and hearing protection; use dust extraction where possible.
- Secure the workpiece; feed against bit rotation to prevent kickback.
- Let the router reach full speed before engaging; stop fully before removing from the cut.
- Inspect bit and collet regularly; replace worn or damaged components.
Description | Specification |
Packaging Type | Hanging card / Blister |
Material | Cutting Edge: Tungsten Carbide Body & Shank: HSS (High Speed Steel) |
Package Dimensions | 138(L) x 78(W) x 46(H)mm |
Package Weight | 38.25g |
Tool Dimensions | 57.55(L) x Ø10mm |
Tool Weight | 16.86g |
Cutting Diameter | 10mm |
Cutting Depth | 25mm |
Shank Diameter | 1/4" |
Shank Length | 30mm |
Country of Origin | Republic of China (PRC) |
Warranty | 6 Months |
Content | 1x Straight Router Bit |
Bulk
Inner Box | |
Dimensions (box/pack) | 385(L) x 175(W) x 57(H)mm |
Weight (box/pack) | 497g |
Qty (box/pack) | 10 |
Outer Box | |
Dimensions (box/pack) | 405(L) x 370(W) x 310(H)mm |
Weight (box/pack) | 5.68kg |
Qty (box/pack) | 100 |