Search Criteria
Items meeting the search criteria
Item No: TCAC0001
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank....
R 1,218.43
Ex VAT:R 1,059.50
Item No: TCAC0002
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank....
R 1,390.35
Ex VAT:R 1,209.00
Item No: TCAC0004
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 35.65
Ex VAT:R 31.00
Item No: TCAC0005
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 46.00
Ex VAT:R 40.00
Item No: TCAC014-2
Annular Cutters 55mm long
Annular Cutter: &O/;14mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns abo..
R 473.23
Ex VAT:R 411.50
Item No: TCAC016-2
Annular Cutters 55mm long
Annular Cutter: &O/;16mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns abo..
R 537.63
Ex VAT:R 467.50
Item No: TCAC018-1
Annular Cutters 30mm
Annular Cutter: &O/;18mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 428.95
Ex VAT:R 373.00
Item No: TCAC019-1
Annular Cutters 30mm
Annular Cutter: &O/;19mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 437.58
Ex VAT:R 380.50
Item No: TCAC024-2
Annular Cutters 55mm long
Annular Cutter: &O/;24mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns abo..
R 781.43
Ex VAT:R 679.50
Item No: TCAC027-2
Annular Cutters 55mm long
Annular Cutter: &O/;27mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 965.43
Ex VAT:R 839.50
Item No: TCAC028-1
Annular Cutters 30mm
Annular Cutter: &O/;28mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 609.50
Ex VAT:R 530.00
Item No: TCAC032-1
Annular Cutters 30mm
Annular Cutter: &O/;32mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 830.30
Ex VAT:R 722.00
Item No: TCAC032-2
Annular Cutters 55mm long
Annular Cutter: &O/;32mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns abo..
R 876.30
Ex VAT:R 762.00
Item No: TCAC033-2
Annular Cutters 55mm long
Annular Cutter: &O/;33mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 967.73
Ex VAT:R 841.50
Item No: TCAC035-1
Annular Cutters 30mm
Annular Cutter: &O/;35mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 881.48
Ex VAT:R 766.50
Item No: TCAC035-2
Annular Cutters 55mm long
Annular Cutter: &O/;35mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 1,145.40
Ex VAT:R 996.00
Item No: TCAC038-2
Annular Cutters 55mm long
Annular Cutter: &O/;38mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 1,457.05
Ex VAT:R 1,267.00
Item No: TCAC040-2
Annular Cutters 55mm long
Annular Cutter: &O/;40mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 1,431.75
Ex VAT:R 1,245.00
Item No: TCAC042-1
Annular Cutters 30mm
Annular Cutter: &O/;42mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 1,318.48
Ex VAT:R 1,146.50
Item No: TCAC045-1
Annular Cutters 30mm
Annular Cutter: &O/;45mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 1,397.25
Ex VAT:R 1,215.00
Item No: TCAC046-1
Annular Cutters 30mm
Annular Cutter: &O/;46mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the h..
R 1,593.33
Ex VAT:R 1,385.50
Item No: TCAC050-2
Annular Cutters 55mm long
Annular Cutter: &O/;50mm
One way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 2,374.18
Ex VAT:R 2,064.50
Item No: TCAC0005-04
Tork Craft Pilot Pin for TCT Cutters — 18-102 mm × 50 mm (Model TCAC0005-04)
The Tork Craft TCAC0005-04 pilot pin is designed for use with tungsten-carbide tipped (TCT) annular cutters sized from 18 mm
up to 102 mm in diameter, supporting a 50 mm cutting depth. The robust 7.9 mm × 108 mm shank ensures secure engagement with standard drill syste..
R 105.80
Ex VAT:R 92.00
Item No: TCAC012-2
Annular Cutters 55mm long
Annular Cutter: &O/;12mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns a..
R 502.55
Ex VAT:R 437.00
Item No: TCAC013-2
Annular Cutters 55mm long
Annular Cutter: &O/;13mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns abo..
R 502.55
Ex VAT:R 437.00
Item No: TCAC014-1
Annular Cutters 30mm
Annular Cutter: &O/;14mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 380.08
Ex VAT:R 330.50
Item No: TCAC015-1
Annular Cutters 30mm
Annular Cutter: &O/; 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns ab..
R 360.53
Ex VAT:R 313.50
Item No: TCAC017-2
Annular Cutters 55mm long
Annular Cutter: &O/;17mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns abo..
R 529.00
Ex VAT:R 460.00
Item No: TCAC020-1
Annular Cutters 30mm
Annular Cutter: &O/;20mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 477.83
Ex VAT:R 415.50
Item No: TCAC021-1
Annular Cutters 30mm
Annular Cutter: &O/;21mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 480.13
Ex VAT:R 417.50
Item No: TCAC021-2
Annular Cutters 55mm long
Annular Cutter: &O/;21mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns abo..
R 638.25
Ex VAT:R 555.00
Item No: TCAC022-2
Annular Cutters 55mm long
Annular Cutter: &O/;22mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns abo..
R 672.18
Ex VAT:R 584.50
Item No: TCAC023-1
Annular Cutters 30mm
Annular Cutter: &O/;23mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 529.58
Ex VAT:R 460.50
Item No: TCAC023-2
Annular Cutters 55mm long
Annular Cutter: &O/;23mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns abo..
R 715.30
Ex VAT:R 622.00
Item No: TCAC026-1
Annular Cutters 30mm
Annular Cutter: &O/;26mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 668.73
Ex VAT:R 581.50
Item No: TCAC026-2
Annular Cutters 55mm long
Annular Cutter: &O/;26mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 838.93
Ex VAT:R 729.50
Item No: TCAC030-2
Annular Cutters 55mm long
Annular Cutter: &O/;30mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 930.35
Ex VAT:R 809.00
Item No: TCAC031-1
Annular Cutters 30mm
Annular Cutter: &O/;31mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 868.83
Ex VAT:R 755.50
Item No: TCAC033-1
Annular Cutters 30mm
Annular Cutter: &O/;33mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 838.93
Ex VAT:R 729.50
Item No: TCAC034-2
Annular Cutters 55mm long
Annular Cutter: &O/;34mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 1,002.23
Ex VAT:R 871.50
Item No: TCAC036-1
Annular Cutters 30mm
Annular Cutter: &O/;36mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 901.60
Ex VAT:R 784.00
Item No: TCAC036-2
Annular Cutters 55mm long
Annular Cutter: &O/;36mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 1,259.83
Ex VAT:R 1,095.50
Item No: TCAC038-1
Annular Cutters 30mm
Annular Cutter: &O/;38mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 1,105.73
Ex VAT:R 961.50
Item No: TCAC044-1
Annular Cutters 30mm
Annular Cutter: &O/;44mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
t..
R 1,486.38
Ex VAT:R 1,292.50
Item No: TCAC044-2
Annular Cutters 55mm long
Annular Cutter: &O/;44mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 1,890.60
Ex VAT:R 1,644.00
Item No: TCAC045-2
Annular Cutters 55mm long
Annular Cutter: &O/;45mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about..
R 1,859.55
Ex VAT:R 1,617.00
Item No: TCAC0005-01
Tork Craft Pilot Pin for TCT Cutters — 12–17 mm × 55 mm (Model TCAC0005-01)
The Tork Craft TCAC0005-01 pilot pin is designed for use with TCT annular cutters ranging from 12 to 17 mm in diameter and 55 mm cutting depth. This precision-ground pilot pin guides the cutter for perfect centering and facilitates smooth slug ejection after drilling. Manu..
R 114.08
Ex VAT:R 99.20
Item No: TCAC0005-02
Tork Craft Pilot Pin for TCT Cutters — 18–102 mm × 35 mm (Model TCAC0005-02)
The Tork Craft TCAC0005-02 pilot pin is designed for tungsten-carbide tipped (TCT) annular cutters sized from 18 mm up to 102 mm diameter, supporting a 35 mm cutting depth. The robust 7.9 mm × 90 mm shank provides secure engagement with standard drill systems, and the pre..
R 108.56
Ex VAT:R 94.40
Item No: TCAC0005-03
Tork Craft Pilot Pin for TCT Cutters — 12–17 mm × 35 mm (Model TCAC0005-03)
The Tork Craft TCAC0005-03 pilot pin is engineered for use with TCT (tungsten carbide tipped) annular cutters sized 12 mm to 17 mm diameter and 35 mm cutting depth. The strong 6.3 mm × 90 mm shank ensures compatibility with standard magnetic drills and helps guide the cutt..
R 75.44
Ex VAT:R 65.60
Item No: TCAC012-1
Tork Craft Annular Hole Cutter — TCT, 12 × 30 mm, Weldon Shank 19.05 mm (Model TCAC012-1)
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tub..
R 389.28
Ex VAT:R 338.50
Categories meeting the search criteria
No Search criteria specified
Brands meeting the search criteria
No Search criteria specified
Information
No Search criteria specified