Item No: DR55030
Double end stubby HSS
Drill diameter: Ø3.0mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing t..
R 118.05
Ex VAT:R 102.65
Item No: DR55035
Double end stubby HSS
Drill diameter: Ø3.5mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing t..
R 153.47
Ex VAT:R 133.45
Item No: DR55049
Double end stubby HSS
Drill diameter: Ø4.9mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing t..
R 277.61
Ex VAT:R 241.40
New Expected Date :
- 10/01/2025
- 15/04/2025
Item No: DR55060
Double end stubby HSS
Drill diameter: Ø6.0mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing t..
R 388.82
Ex VAT:R 338.10
Item No: DR60050
HSS standard drill bit
Drill diameter: Ø5.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plasti..
R 142.77
Ex VAT:R 124.15
Item No: DR60060
HSS standard drill bit
Drill diameter: Ø6.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plasti..
R 184.40
Ex VAT:R 160.35
Item No: DR60065
HSS standard drill bit
Drill diameter: Ø6.5mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plasti..
R 208.15
Ex VAT:R 181.00
Item No: DR60080
HSS standard drill bit
Drill diameter: Ø8.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plasti..
R 309.29
Ex VAT:R 268.95
New Expected Date :
- 10/01/2025
- 15/02/2025
Item No: DR60082
HSS standard drill bit
Drill diameter: Ø8.2mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plasti..
R 350.92
Ex VAT:R 305.15
Item No: DR60105
DRILL BIT HSS STANDARD 10.5MM X5 PACK....
R 255.76
Ex VAT:R 222.40
New Expected Date :
- 10/01/2025
Item No: PG46502
HEX SHANK DRILL BIT 2MM....
R 75.27
Ex VAT:R 65.45
Item No: TC353042
Step drill
Use one drill for many holes. Multiple step and countersink tool for drilling
and countersinking in one smooth operation.
SIZE: Ø6-18mm
STEP DIAMETER: 2mm
STEP HEIGHT: 4mm
STEEL: HSS (High-speed steel)
Application:
Suitable for materials with a maximum thickness of 4 to 6mm depending on the
hardness. The best type of d..
R 275.37
Ex VAT:R 239.45
Item No: TC353045
Step drill
Use one drill for many holes. Multiple step and countersink tool for drilling
and countersinking in one smooth operation.
SIZE: Ø4-22mm
STEP DIAMETER: 2mm
STEP HEIGHT: 5mm
STEEL: HSS (High-speed steel)
Application:
Suitable for materials with a maximum thickness of 4 to 6mm depending on the
hardness. The best type of d..
R 396.92
Ex VAT:R 345.15
New Expected Date :
- 27/11/2024
- 15/03/2025
Item No: TC353046
Step drill
Use one drill for many holes. Multiple step and countersink tool for drilling
and countersinking in one smooth operation.
SIZE: Ø5-35mm
STEP HEIGHT: 6mm
STEEL: HSS (High-speed steel)
STEP DIAMETERS:
5, 7.5, 10, 13, 16, 19, 21, 23, 26, 29, 31, 33 & 35mm
Application:
Suitable for materials with a maximum thickness of 4 ..
R 1,096.99
Ex VAT:R 953.90
Item No: TCAC0001
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,168.52
Ex VAT:R 1,016.10
Item No: TCAC0002
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,333.43
Ex VAT:R 1,159.50
Item No: TCAC0004
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 53.71
Ex VAT:R 46.70
Item No: TCAC0005
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 57.21
Ex VAT:R 49.75
Item No: TCAC010
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 437.35
Ex VAT:R 380.30
New Expected Date :
- 23/12/2024
- 15/03/2025
Item No: TCAC014-2
Annular Cutters 55mm long
Annular Cutter: Ø 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 453.62
Ex VAT:R 394.45
Item No: TCAC016-2
Annular Cutters 55mm long
Annular Cutter: Ø 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 515.49
Ex VAT:R 448.25
Item No: TCAC018-1
Annular Cutters 30mm
Annular Cutter: Ø 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 411.01
Ex VAT:R 357.40
Item No: TCAC019-1
Annular Cutters 30mm
Annular Cutter: Ø 19
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 419.23
Ex VAT:R 364.55
Item No: TCAC024-2
Annular Cutters 55mm long
Annular Cutter: Ø 24
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 749.17
Ex VAT:R 651.45
Item No: TCAC027-2
Annular Cutters 55mm long
Annular Cutter: Ø 27
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 731.00
Ex VAT:R 635.65
Item No: TCAC028-1
Annular Cutters 30mm
Annular Cutter: Ø 28
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 584.20
Ex VAT:R 508.00
New Expected Date :
- 15/02/2025
Item No: TCAC032-1
Annular Cutters 30mm
Annular Cutter: Ø 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 795.92
Ex VAT:R 692.10
New Expected Date :
- 15/02/2025
Item No: TCAC032-2
Annular Cutters 55mm long
Annular Cutter: Ø 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 840.31
Ex VAT:R 730.70
New Expected Date :
- 14/01/2025
- 15/02/2025
Item No: TCAC033-2
Annular Cutters 55mm long
Annular Cutter: Ø 33
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 927.88
Ex VAT:R 806.85
New Expected Date :
- 15/02/2025
Item No: TCAC035-1
Annular Cutters 30mm
Annular Cutter: Ø 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 845.42
Ex VAT:R 735.15
Item No: TCAC035-2
Annular Cutters 55mm long
Annular Cutter: Ø 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,098.37
Ex VAT:R 955.10
Item No: TCAC038-2
Annular Cutters 55mm long
Annular Cutter: Ø 38
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,373.27
Ex VAT:R 1,194.15
New Expected Date :
- 14/01/2025
- 15/02/2025
Item No: TCAC040-2
Annular Cutters 55mm long
Annular Cutter: Ø 40
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,373.27
Ex VAT:R 1,194.15
Item No: TCAC042-1
Annular Cutters 30mm
Annular Cutter: Ø 42
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 1,318.30
Ex VAT:R 1,146.35
Item No: TCAC045-1
Annular Cutters 30mm
Annular Cutter: Ø 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 1,340.27
Ex VAT:R 1,165.45
Item No: TCAC046-1
Annular Cutters 30mm
Annular Cutter: Ø 46
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 1,628.98
Ex VAT:R 1,416.50
Item No: TCAC050-2
Annular Cutters 55mm long
Annular Cutter: Ø 50
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 2,473.02
Ex VAT:R 2,150.45
Item No: TCAC055-1
ANNULAR HOLE CUTTER HSS 55 X 30MM WELD SHANK 19.05MM....
R 1,923.15
Ex VAT:R 1,672.30
Item No: TCAC058-1
ANNULAR HOLE CUTTER HSS 58 X 30MM WELD SHANK 19.05MM....
R 1,785.66
Ex VAT:R 1,552.75
Item No: ALP613015
//HSS COBALT JOBBER DRILLS BITS
Size:
ø 15.0 x 169/114 mm
Bulk: Qty 1
Range of application:
5% cobalt-alloyed jobber drills with high heat-resistance for drilling steels with tensile strength over 800 N/mm², specially suitable for high alloyed steels, bearing-steels, hot/cold-rolled steel. Ideal for stainless steel.
Stren..
R 1,158.63
Ex VAT:R 1,007.50
Item No: ALP613016
//HSS COBALT JOBBER DRILLS BITS
Size:
ø 16.0 x 178/120 mm
Bulk: Qty 1
Range of application:
5% cobalt-alloyed jobber drills with high heat-resistance for drilling steels with tensile strength over 800 N/mm², specially suitable for high alloyed steels, bearing-steels, hot/cold-rolled steel. Ideal for stainless steel.
Stren..
R 1,402.48
Ex VAT:R 1,219.55
Item No: ALP65250040
ALPEN SC CENTREDRILL 4.0X10.00....
R 2,494.52
Ex VAT:R 2,169.15
Item No: ALP728007291
ALPEN STEP DRILL HSS Co5 TIN 6-37MM....
R 7,213.49
Ex VAT:R 6,272.60
Item No: DR55030-1
Tork Craft - Double end stubby HSS
Drill diameter: Ø3.0mm
Packaging: Bulk - 1 Piece
Point: 135° split point
Drill bit: HSS (High-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the..
R 18.23
Ex VAT:R 15.85
Item No: DR55048-1
Tork Craft - Double end stubby HSS
Drill diameter: Ø4.8mm
Packaging: Bulk - 1 Piece
Point: 135° split point
Drill bit: HSS (High-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the..
R 30.25
Ex VAT:R 26.30
Item No: DR55060-1
Tork Craft - Double end stubby HSS
Drill diameter: Ø6.0mm
Packaging: Bulk - 1 Piece
Point: 135° split point
Drill bit: HSS (High-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the..
R 41.92
Ex VAT:R 36.45
Item No: MAY221013
ALPEN HSS 1869R-FORTE 3/480 13.00MM....
R 2,172.12
Ex VAT:R 1,888.80
Item No: DR11002
DRILL BIT HSS STANDARD 2.0MM HEX SHANK 1/CARD....
R 16.96
Ex VAT:R 14.75
Item No: DR11008
DRILL BIT HSS STANDARD 8.0MM HEX SHANK 1/CARD....
R 48.93
Ex VAT:R 42.55
New Expected Date :
- 10/01/2025
Item No: DR21002
DRILL HSS 2.0MM 135DEG 1/CARD HEX SHANK INDUSTRIAL BIT....
R 19.44
Ex VAT:R 16.90