Menu
Your Cart
0

Screwdriving bits

Bit holders Bit holders
Dimpler Dimpler
Even pilots Even pilots
Flexible shaft Flexible shaft
Hex Hex
Hook driver Hook driver
Nutsetters Nutsetters
Phillips Phillips
PHZ PHZ
Pozi Pozi
Reversible Reversible
Sets Sets
Slotted Slotted
Socket Socket
Square Square
Torqset Torqset
Torx Torx
Triangular Triangular
Triwing Triwing
Compare0
Reset
Pozi.no.2 70mm Power Bit 1cd
Item No: SC23151
Pozi.no.2 70mm Power Bit 1cd
Classic Pozi 70 mm PZ Bit No. 2 - 1 Pack Carded Classic The Classic Bit is hardened using a special procedure. The tough version resulting from this method meets the demands across all areas of industry and craft. Based on the Standard Bit, the other bits are optimised by means of various hardening and coating methods. It provide..
R 39.22
Ex VAT:R 34.10
Add to Wish List
Allen/hex 4mm Security Insert Bit 25mm Bulk
Item No: SC25170
Allen/hex 4mm Security Insert Bit 25mm Bulk
Classic Hexagon Tamper Proof Bits Tamper Proof Hex Bit:  4 mm (length: 25 mm) Packaging: Bulk (sold per piece)   The Tamper Proof Hex driver is developed as a security application. See the picture of the example screw. The Classic Hexagon Bit is hardened using a special procedure. The tough version resulting from ....
R 67.56
Ex VAT:R 58.75
Add to Wish List
Mag.bit Holder 72 X 11.1mm 1cd
Item No: SC37201
Mag.bit Holder 72 X 11.1mm 1cd
Magnetic Bit Holder Magnetic Bit Holder ¼" Length: 72mm Packaging: 1 Pack Carded An extension to use with your screwdriver to hold a Pozidriv, Square, Phillips or Slotted screwdriver bit by means of a magnet. Very useful to hold screws without hurting fingers. All bits with a ¼ inch drive will fit in this magnetic ....
R 216.37
Ex VAT:R 188.15
Add to Wish List
Magnetic Bit Holder 150mm One Touch Carded 1/4" Hex
Item No: T BH21010150
Magnetic Bit Holder 150mm One Touch Carded 1/4" Hex
Tork Craft Magnetic Bit Holder — 150 mm, One-Touch Quick-Release, 1/4" Hex (Model T-BH21010150) Extend your reach and speed up bit changes. The Tork Craft T-BH21010150 is a 150 mm magnetic bit holder with a one-touch quick-release sleeve and 1/4" hex shank. It firmly grips standard 1/4" hex bits while giving extra clearance for fastener access in ..
R 197.40
Ex VAT:R 171.65
Add to Wish List
Magnetic Bit Holder 300mm One Touch Carded 1/4" Hex
Item No: T BH21010300
Magnetic Bit Holder 300mm One Touch Carded 1/4" Hex
Tork Craft Magnetic Bit Holder — 300 mm, One-Touch Quick-Release, 1/4" Hex (Model T-BH21010300) Extend your reach and speed up bit changes. The Tork Craft T-BH21010300 is a 300 mm magnetic bit holder with a one-touch quick-release sleeve and 1/4" hex shank. It firmly grips standard 1/4" hex bits while giving extra clearance for fastener access in ..
R 224.83
Ex VAT:R 195.50
Add to Wish List
Magnetic Bit Holder 90mm Universal Carded 1/4" Hex
Item No: T BH30090
Magnetic Bit Holder 90mm Universal Carded 1/4" Hex
Tork Craft Magnetic Bit Holder — 90 mm, Universal Quick-Release, 1/4″ Hex (Model T-BH30090) The Tork Craft T-BH30090 is a reliable magnetic bit holder with a 90 mm overall length, universal quick-release sleeve for fast bit changes, and a 1/4″ hex shank compatible with standard drivers and screw machines. Supplied in carded packaging for easy iden..
R 206.89
Ex VAT:R 179.90
Add to Wish List
Magnetic Bit Holder 100mm Universal Carded 1/4" Hex
Item No: T BH30100
Magnetic Bit Holder 100mm Universal Carded 1/4" Hex
Tork Craft Magnetic Bit Holder — 100 mm Universal Quick-Release, 1/4" Hex (Model T-BH30100) The Tork Craft T-BH30100 magnetic bit holder provides reliable bit retention and easy quick-release operation. With a 100 mm extension and a 1/4" hex shank, it’s ideal for reaching into confined spaces and for driving screws where precision and control are ..
R 218.90
Ex VAT:R 190.35
Add to Wish List
D/end Phil.2x65mm Pwr.bit Bulk
Item No: T DE PH0265B
D/end Phil.2x65mm Pwr.bit Bulk
Double-ended bit Phillips Tip #: 2 Hex shank: 6.35mm (1/4") Length: 65mm Packaging: Bulk Application: The tips have been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001..
R 17.25
Ex VAT:R 15.00
Add to Wish List
D/end Ph.2xsl.5 65mm Pwr.b Blk
Item No: T DE PHSL65B
D/end Ph.2xsl.5 65mm Pwr.b Blk
Double-ended bit Phillips Tip #: 2 Slot-head: 5mm Hex shank: 6.35mm (1/4") Length: 65mm Packaging: Bulk Application: The tips have been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: ..
R 17.25
Ex VAT:R 15.00
Add to Wish List
Magnetic Bit Holder 54mm Bulk Solid One Piece
Item No: T MBH54B
Magnetic Bit Holder 54mm Bulk Solid One Piece
Magnetic bit holder Hex shank: 6.35mm (1/4") Length: 54mm Packaging: Bulk Application: The bit holder is used with all hex shank 6.35mm bits. The bit holder features a magnet to keep the bit in place and to assist with holding screws when screwdriving. The shank is compatible with the Snap-it! Quick change connectors: T..
R 93.96
Ex VAT:R 81.70
Add to Wish List
Nutsetter 5/16x65mm Mag. Bulk
Item No: T NS01
Nutsetter 5/16x65mm Mag. Bulk
Nutsetter Size: 5/16" (7.9mm) Length: 65mm Packaging: Bulk Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B ..
R 49.85
Ex VAT:R 43.35
Add to Wish List
Nutsetter 3/8x65mm Mag. Bulk
Item No: T NS02
Nutsetter 3/8x65mm Mag. Bulk
Nutsetter Size: 3/8" (9.5mm) Length: 65mm Packaging: Bulk Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B T..
R 49.97
Ex VAT:R 43.45
Add to Wish List
Nutsetter Magnetic 6x65mm Carded Nutsetter Magnetic 6x65mm Carded
Item No: T NS06065C
Nutsetter Magnetic 6x65mm Carded
Nutsetter Size: 6mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC3..
R 59.11
Ex VAT:R 51.40
Add to Wish List
Nutsetter Magnetic 7x65mm Carded
Item No: T NS07065C
Nutsetter Magnetic 7x65mm Carded
Nutsetter Size: 7mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC3..
R 70.67
Ex VAT:R 61.45
New Expected Date :
  • 15/05/2026
Add to Wish List
Nutsetter Magnetic 8x65mm Carded Nutsetter Magnetic 8x65mm Carded
Item No: T NS08065C
Nutsetter Magnetic 8x65mm Carded
Nutsetter Size: 8mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC3..
R 75.79
Ex VAT:R 65.90
Add to Wish List
Nutsetter 13mmx65mm Bulk
Item No: T NS09
Nutsetter 13mmx65mm Bulk
Nutsetter Size: 13mm Length: 65mm Packaging: Bulk Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC33A...
R 51.29
Ex VAT:R 44.60
Add to Wish List
Nutsetter Magnetic 10x65mm Carded Nutsetter Magnetic 10x65mm Carded
Item No: T NS10065C
Nutsetter Magnetic 10x65mm Carded
Nutsetter Size: 10mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC..
R 75.79
Ex VAT:R 65.90
Add to Wish List
Nutsetter Magnetic 12x65mm Carded Nutsetter Magnetic 12x65mm Carded
Item No: T NS12065C
Nutsetter Magnetic 12x65mm Carded
Nutsetter Size: 12mm Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B TZ AC..
R 76.19
Ex VAT:R 66.25
Add to Wish List
Nutsetter 1/4 X65mm Mag. Bulk
Item No: T NS14
Nutsetter 1/4 X65mm Mag. Bulk
NUTSETTER 1/4 X65MM MAG. BULK....
R 56.24
Ex VAT:R 48.90
Add to Wish List
Nutsetter 3/8"x 45mm Carded Nutsetter 3/8"x 45mm Carded
Item No: T NS38045C
Nutsetter 3/8"x 45mm Carded
Nutsetter Size: 3/8" (9.5mm) Length: 45mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B ..
R 67.85
Ex VAT:R 59.00
Add to Wish List
Nutsetter 3/8"x 65mm Carded Nutsetter 3/8"x 65mm Carded
Item No: T NS38065C
Nutsetter 3/8"x 65mm Carded
Nutsetter Size: 3/8" (9.5mm) Length: 65mm Packaging: Carded 1 Application: The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head screws. The nutsetter features: Standard six-. design Magnet to fold screws Use with our SNAP-IT! range quick change connectors: TZ AC33B ..
R 71.70
Ex VAT:R 62.35
Add to Wish List
D/end Ph1 X Ph1 65mm 1/card D/end Ph1 X Ph1 65mm 1/card
Item No: T PH0165C
D/end Ph1 X Ph1 65mm 1/card
Tork Craft PH1 Driver Bit — 65 mm Length, 1/4″ Hex Shank (Model T-PH0165C) Carded (for display) The Tork Craft T-PH0165C driver bit features a PH1 tip, a 65 mm overall length and a 1/4″ hex shank. Supplied in carded packaging, it fits standard quick-change chucks, drills and power drivers. Ideal for everyday screw-driving tasks where quality and ..
R 39.39
Ex VAT:R 34.25
Add to Wish List
Phil.2 X 25mm Insert Bit Bulk
Item No: T PH0225B
Phil.2 X 25mm Insert Bit Bulk
Phillips bit Phillips Tip #: 2 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001 - Mag..
R 9.26
Ex VAT:R 8.05
Add to Wish List
Phil.2 X 25mm Ins.bit 2/card
Item No: T PH0225C
Phil.2 X 25mm Ins.bit 2/card
Phillips bit Phillips Tip #: 2 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Carded 2 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001 -..
R 40.94
Ex VAT:R 35.60
Add to Wish List
Philips No.2 X 25mm Drywall Bit Pouch
Item No: T PHDW025-1
Philips No.2 X 25mm Drywall Bit Pouch
Tork Craft Phillips No.2 x 25 mm Drywall Bit (Model PHDW025) This Tork Craft PHDW025 bit features a Phillips #2 tip and 25 mm length, with a 1/4″ (6.35 mm) hex shank for use with quick-change chucks and impact drivers. It’s designed to drive drywall screws efficiently and reliably in bulk packaging. Pouch (Display)....
R 35.71
Ex VAT:R 31.05
Add to Wish List
D/end Ph2 X 5mm Sl.65mm 1/card D/end Ph2 X 5mm Sl.65mm 1/card
Item No: T PHS0265C
D/end Ph2 X 5mm Sl.65mm 1/card
Tork Craft Double-Ended Bit PH2 × Slotted 5 mm, 65 mm (Model T-PHS0265C) Carded (for display) This single bit by Tork Craft features a PH2 (Phillips #2) tip on one end and a Slotted 5 mm tip on the other end, with an overall length of 65 mm. It is supplied in carded retail packaging and is designed for use in standard drivers or quick-change chuc..
R 39.39
Ex VAT:R 34.25
Add to Wish List
Pozi.1 X 25mm Ins.bit 2/card Pozi.1 X 25mm Ins.bit 2/card
Item No: T PZ0125C
Pozi.1 X 25mm Ins.bit 2/card
Pozidrive bit Pozidrive Tip #: 1 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Carded 2 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001..
R 40.94
Ex VAT:R 35.60
Add to Wish List
Pozi.1 X 50mm Power Bit 1/card
Item No: T PZ0150C
Pozi.1 X 50mm Power Bit 1/card
Pozidrive bit Pozidrive Tip #: 1 Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: ..
R 39.39
Ex VAT:R 34.25
Add to Wish List
Pozi.2 X 150mm Power Bit Bulk
Item No: T PZ02150B
Pozi.2 X 150mm Power Bit Bulk
Pozidrive bit Pozidrive Tip #: 2 Hex shank: 6.35mm (1/4") Length: 150mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: ..
R 45.14
Ex VAT:R 39.25
Add to Wish List
Pozi No.2 Power Bit X 150mm Carded Pozi No.2 Power Bit X 150mm Carded
Item No: T PZ02150C
Pozi No.2 Power Bit X 150mm Carded
Pozidrive bit Pozidrive Tip #: 2 Hex shank: 6.35mm (1/4") Length: 150mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: ..
R 49.16
Ex VAT:R 42.75
Add to Wish List
D/end Pz2 X Pz2 45mm 1/card D/end Pz2 X Pz2 45mm 1/card
Item No: T PZ0245C
D/end Pz2 X Pz2 45mm 1/card
Tork Craft Double-Ended Pozi Bit — PZ2 × PZ2 (45 mm) Packaging: Carded (for display) The pocket-length workhorse for installers and shop floors. This 45 mm double-ended PZ2 × PZ2 bit gives you two fresh tips in one compact body, so you can flip and keep driving. Ideal for cabinetry, hardware fitting, electrical and general assembly where ....
R 39.39
Ex VAT:R 34.25
Add to Wish List
Pozi.2 X 50mm Power Bit 1/card Pozi.2 X 50mm Power Bit 1/card
Item No: T PZ0250C
Pozi.2 X 50mm Power Bit 1/card
Pozidrive bit Pozidrive Tip #: 2 Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: ..
R 39.39
Ex VAT:R 34.25
Add to Wish List
Pozi.2 X 89mm Power Bit Bulk
Item No: T PZ0289B
Pozi.2 X 89mm Power Bit Bulk
Pozidrive bit Pozidrive Tip #: 2 Hex shank: 6.35mm (1/4") Length: 89mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: T..
R 25.01
Ex VAT:R 21.75
Add to Wish List
Pozi.3 X 25mm Ins.bit 2/card Pozi.3 X 25mm Ins.bit 2/card
Item No: T PZ0325C
Pozi.3 X 25mm Ins.bit 2/card
Pozidrive bit Pozidrive Tip #: 3 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Carded 2 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: T 938001..
R 40.94
Ex VAT:R 35.60
Add to Wish List
Insert Bit Set 8pce Slotted 3mm-9mm 25mm
Item No: T SC2500801C
Insert Bit Set 8pce Slotted 3mm-9mm 25mm
Bit Set 8 Piece Slotted 3mm-9mm Specifications: High grade alloy steel Rust resistant sand blasted finish Use with Tork Craft bit holders Standard ¼” hex shank   Use with the below Tork Craft bit holders: T BH54C MAG.BIT HOLDER 54MM CARDED ....
R 99.36
Ex VAT:R 86.40
Add to Wish List
Insert Bit Set 8pce Hex H1.5 - H6 25mm Allen Size1.5 2 2.5 3 4 5 5.5 6
Item No: T SC2500803C
Insert Bit Set 8pce Hex H1.5 - H6 25mm Allen Size1.5 2 2.5 3 4 5 5.5 6
Screwdriver bit set - HEX (Allenkey) 8 Piece Sizes 1,5mm up to 6mm Specifications: High grade alloy steel Rust resistant sand blasted finish Use with Tork Craft bit holders Standard ¼” hex shank Use with the below Tork Craft bit holders: T BH54C MAG.BIT HOLDER 54MM C..
R 89.76
Ex VAT:R 78.05
Add to Wish List
S/d Power Bit Set 50mm 5pce S/d Power Bit Set 50mm 5pce
Item No: T SC50005C
S/d Power Bit Set 50mm 5pce
Tork Craft Power Bit Set — 5-Piece (50 mm) Packaging: Carded (for retail display) A practical 5-piece kit of 50 mm power bits for workshop and site tasks. The 1/4″ hex shanks drop straight into standard bit holders and drivers, giving steady control for cabinetry, hardware installs and general assembly where a short, rigid bit is the ....
R 84.58
Ex VAT:R 73.55
Add to Wish List
S/d Power Bit 4mmx50mm Slotted 1/cd S/d Power Bit 4mmx50mm Slotted 1/cd
Item No: T SL0450C
S/d Power Bit 4mmx50mm Slotted 1/cd
Slot-head bit Slot-head size: 4mm Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: ..
R 34.27
Ex VAT:R 29.80
Add to Wish List
S/d Power Bit 6mmx50mm Slotted 1/cd S/d Power Bit 6mmx50mm Slotted 1/cd
Item No: T SL0650C
S/d Power Bit 6mmx50mm Slotted 1/cd
Slot-head bit Slot-head size: 6mm Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: ..
R 34.27
Ex VAT:R 29.80
New Expected Date :
  • 15/03/2026
Add to Wish List
S/d Power Bit 10mmx50mm Slotted 1/cd S/d Power Bit 10mmx50mm Slotted 1/cd
Item No: T SL1050C
S/d Power Bit 10mmx50mm Slotted 1/cd
Slot-head bit Slot-head size: 10mm Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connectors: ..
R 34.27
Ex VAT:R 29.80
Add to Wish List
Square Recess Pwr Bit No.1x150mm Bulk
Item No: T SQ01150B
Square Recess Pwr Bit No.1x150mm Bulk
Robertson square recess bit Robertson Tip #: 1 Hex shank: 6.35mm (1/4") Length: 150mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connec..
R 58.31
Ex VAT:R 50.70
Add to Wish List
Square Recess Bit #1 25mm - Bulk
Item No: T SQ0125B
Square Recess Bit #1 25mm - Bulk
Robertson square recess bit Robertson Tip #: 1 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: ..
R 7.13
Ex VAT:R 6.20
Add to Wish List
Square Recess Pwr Bit No.1x50mm Bulk
Item No: T SQ0150B
Square Recess Pwr Bit No.1x50mm Bulk
Robertson square recess bit Robertson Tip #: 1 Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connect..
R 9.20
Ex VAT:R 8.00
Add to Wish List
Square Recess Pwr Bit No.1x50mm 1/card Square Recess Pwr Bit No.1x50mm 1/card
Item No: T SQ0150C
Square Recess Pwr Bit No.1x50mm 1/card
Robertson square recess bit Robertson Tip #: 1 Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change con..
R 31.40
Ex VAT:R 27.30
Add to Wish List
Square Recess Pwr Bit No.2x150mm Bulk
Item No: T SQ02150B
Square Recess Pwr Bit No.2x150mm Bulk
Robertson square recess bit Robertson Tip #: 2 Hex shank: 6.35mm (1/4") Length: 150mm Packaging: Bulk Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change connec..
R 58.31
Ex VAT:R 50.70
Add to Wish List
Square Recess Ins. Bit No.2x25mm 2/card Square Recess Ins. Bit No.2x25mm 2/card
Item No: T SQ0225C
Square Recess Ins. Bit No.2x25mm 2/card
Robertson square recess bit Robertson Tip #: 2 Hex shank: 6.35mm (1/4") Length: 25mm Packaging: Carded 2 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the following bit holders: ..
R 34.50
Ex VAT:R 30.00
Add to Wish List
Square Recess Pwr Bit No.3x50mm 1/card Square Recess Pwr Bit No.3x50mm 1/card
Item No: T SQ0350C
Square Recess Pwr Bit No.3x50mm 1/card
Robertson square recess bit Robertson Tip #: 3 Hex shank: 6.35mm (1/4") Length: 50mm Packaging: Carded 1 Application: The tip has been hardened to be used with high torque power tools. The shank is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder. The shank is compatible with the Snap-it! quick change con..
R 31.40
Ex VAT:R 27.30
Add to Wish List
Triwing No.1x25mm Insert Bit Bulk
Item No: T TR001
Triwing No.1x25mm Insert Bit Bulk
TorkCraft - Tri Wing Insert Bit Size: TW1 x 25mm Qty: 2 Piece Application: The Tork Craft Tri Wing has S2 material for the best performance and long life. Used with a 1/4" F bit holder, 1/4" Shank. 1/4" Shank S2 material for best performance WARNING: Using any tool can be dangerous. Always select the right..
R 41.75
Ex VAT:R 36.30
Add to Wish List
Triwing No.1x25mm Insert Bit Carded
Item No: T TR001C
Triwing No.1x25mm Insert Bit Carded
TorkCraft - Tri Wing Insert Bit Size: TW1 x 25mm Qty: 2 Piece Application: The Tork Craft Tri Wing has S2 material for the best performance and long life. Used with a 1/4" F bit holder, 1/4" Shank. 1/4" Shank S2 material for best performance WARNING: Using any tool can be dangerous. Always select the right..
R 49.34
Ex VAT:R 42.90
Add to Wish List
Triwing No.3x25mm Insert Bit Bulk
Item No: T TR003
Triwing No.3x25mm Insert Bit Bulk
TorkCraft - Tri Wing Insert Bit Size: TW3 x 25mm Qty: 2 Piece Application: The Tork Craft Tri Wing has S2 material for the best performance and long life. Used with a 1/4" F bit holder, 1/4" Shank. 1/4" Shank S2 material for best performance WARNING: Using any tool can be dangerous. Always select the right..
R 41.98
Ex VAT:R 36.50
Add to Wish List
Showing 401 to 450 of 556 (12 Pages)