Item No: TCAC0001
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,168.52
Ex VAT:R 1,016.10
Item No: TCAC0002
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,333.43
Ex VAT:R 1,159.50
Item No: TCAC0004
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 53.71
Ex VAT:R 46.70
Item No: TCAC0005
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 57.21
Ex VAT:R 49.75
Item No: TCAC010
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 437.35
Ex VAT:R 380.30
New Expected Date :
- 23/12/2024
- 15/03/2025
Item No: TCAC014-2
Annular Cutters 55mm long
Annular Cutter: Ø 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 453.62
Ex VAT:R 394.45
Item No: TCAC016-2
Annular Cutters 55mm long
Annular Cutter: Ø 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 515.49
Ex VAT:R 448.25
Item No: TCAC018-1
Annular Cutters 30mm
Annular Cutter: Ø 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 411.01
Ex VAT:R 357.40
Item No: TCAC019-1
Annular Cutters 30mm
Annular Cutter: Ø 19
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 419.23
Ex VAT:R 364.55
Item No: TCAC024-2
Annular Cutters 55mm long
Annular Cutter: Ø 24
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 749.17
Ex VAT:R 651.45
Item No: TCAC027-2
Annular Cutters 55mm long
Annular Cutter: Ø 27
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 731.00
Ex VAT:R 635.65
Item No: TCAC028-1
Annular Cutters 30mm
Annular Cutter: Ø 28
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 584.20
Ex VAT:R 508.00
New Expected Date :
- 15/02/2025
Item No: TCAC032-1
Annular Cutters 30mm
Annular Cutter: Ø 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 795.92
Ex VAT:R 692.10
New Expected Date :
- 15/02/2025
Item No: TCAC032-2
Annular Cutters 55mm long
Annular Cutter: Ø 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 840.31
Ex VAT:R 730.70
New Expected Date :
- 14/01/2025
- 15/02/2025
Item No: TCAC033-2
Annular Cutters 55mm long
Annular Cutter: Ø 33
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 927.88
Ex VAT:R 806.85
New Expected Date :
- 15/02/2025
Item No: TCAC035-1
Annular Cutters 30mm
Annular Cutter: Ø 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 845.42
Ex VAT:R 735.15
Item No: TCAC035-2
Annular Cutters 55mm long
Annular Cutter: Ø 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,098.37
Ex VAT:R 955.10
Item No: TCAC038-2
Annular Cutters 55mm long
Annular Cutter: Ø 38
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,373.27
Ex VAT:R 1,194.15
New Expected Date :
- 14/01/2025
- 15/02/2025
Item No: TCAC040-2
Annular Cutters 55mm long
Annular Cutter: Ø 40
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,373.27
Ex VAT:R 1,194.15
Item No: TCAC042-1
Annular Cutters 30mm
Annular Cutter: Ø 42
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 1,318.30
Ex VAT:R 1,146.35
Item No: TCAC045-1
Annular Cutters 30mm
Annular Cutter: Ø 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 1,340.27
Ex VAT:R 1,165.45
Item No: TCAC046-1
Annular Cutters 30mm
Annular Cutter: Ø 46
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 1,628.98
Ex VAT:R 1,416.50
Item No: TCAC050-2
Annular Cutters 55mm long
Annular Cutter: Ø 50
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 2,473.02
Ex VAT:R 2,150.45
Item No: TCAC055-1
ANNULAR HOLE CUTTER HSS 55 X 30MM WELD SHANK 19.05MM....
R 1,923.15
Ex VAT:R 1,672.30
Item No: TCAC058-1
ANNULAR HOLE CUTTER HSS 58 X 30MM WELD SHANK 19.05MM....
R 1,785.66
Ex VAT:R 1,552.75
Item No: TCAC018-3
ANNULAR HOLE CUTTER TCT 18 X 35MM WELD SHANK 19.05MM....
R 845.54
Ex VAT:R 735.25
Item No: TCAC022-4
ANNULAR HOLE CUTTER TCT 22 X 55MM WELD SHANK 19.05M....
R 956.63
Ex VAT:R 831.85
Item No: TCAC026-4
ANNULAR HOLE CUTTER TCT 26 X 55MM WELD SHANK 19.05MM....
R 1,007.40
Ex VAT:R 876.00
Item No: TCAC030-4
ANNULAR HOLE CUTTER TCT 30 X 55MM WELD SHANK 19.05MM....
R 1,007.40
Ex VAT:R 876.00
Item No: TCAC060-2
ANNULAR HOLE CUTTER HSS 60 X 55MM WELD SHANK 19.05MM....
R 3,235.70
Ex VAT:R 2,813.65
Item No: TCAC064-1
ANNULAR HOLE CUTTER HSS 64 X 30MM WELD SHANK 19.05MM....
R 2,830.67
Ex VAT:R 2,461.45
Item No: TCAC075-3
ANNULAR HOLE CUTTER TCT 75 X 30MM WELD SHANK 31.75MM....
R 3,012.60
Ex VAT:R 2,619.65
Item No: TCAC095-3
ANNULAR HOLE CUTTER TCT 95 X 30MM WELD SHANK 31.75MM....
R 4,455.68
Ex VAT:R 3,874.50
Item No: TCAC095-4
ANNULAR HOLE CUTTER TCT 95 X 55MM WELD SHANK 31.75MM....
R 5,151.89
Ex VAT:R 4,479.90
Item No: TCAC006
6mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 400.03
Ex VAT:R 347.85
Item No: TCAC011
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 394.34
Ex VAT:R 342.90
New Expected Date :
- 23/12/2024
Item No: TCAC012-2
Annular Cutters 55mm long
Annular Cutter: Ø 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 481.10
Ex VAT:R 418.35
Item No: TCAC013-2
Annular Cutters 55mm long
Annular Cutter: Ø 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 481.10
Ex VAT:R 418.35
Item No: TCAC014-1
Annular Cutters 30mm
Annular Cutter: Ø 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 364.26
Ex VAT:R 316.75
New Expected Date :
- 14/01/2025
- 15/02/2025
Item No: TCAC015-1
Annular Cutters 30mm
Annular Cutter: Ø 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 345.58
Ex VAT:R 300.50
Item No: TCAC017-2
Annular Cutters 55mm long
Annular Cutter: Ø 17
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 507.27
Ex VAT:R 441.10
New Expected Date :
- 14/01/2025
Item No: TCAC020-1
Annular Cutters 30mm
Annular Cutter: Ø 20
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 457.99
Ex VAT:R 398.25
Item No: TCAC021-1
Annular Cutters 30mm
Annular Cutter: Ø 21
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 460.52
Ex VAT:R 400.45
Item No: TCAC021-2
Annular Cutters 55mm long
Annular Cutter: Ø 21 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 611.74
Ex VAT:R 531.95
Item No: TCAC022-2
Annular Cutters 55mm long
Annular Cutter: Ø 22
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 644.69
Ex VAT:R 560.60
Item No: TCAC023-1
Annular Cutters 30mm
Annular Cutter: Ø 23
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 507.50
Ex VAT:R 441.30
Item No: TCAC023-2
Annular Cutters 55mm long
Annular Cutter: Ø 23
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 685.98
Ex VAT:R 596.50
Item No: TCAC026-1
Annular Cutters 30mm
Annular Cutter: Ø 26
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the..
R 641.07
Ex VAT:R 557.45
Item No: TCAC026-2
Annular Cutters 55mm long
Annular Cutter: Ø 26
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 804.20
Ex VAT:R 699.30
Item No: TCAC030-2
Annular Cutters 55mm long
Annular Cutter: Ø 30
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 892.17
Ex VAT:R 775.80