Item No: TC08331
Diamond point - Ø 2.4mm - Cylindrical
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals
QTY: 1....
R 18.06
Ex VAT:R 15.70
Item No: TC08336
Tungsten carbide cutter - Ø 3.2mm - Cylindrical
The tungsten carbide cutter has greater edge retention when compared to a steel cutter and can be used for material removal, shaping and smoothing
on hard materials.
The cutter can be used on the following materials:
Hardened and stainless steel
Cast iron
Non-ferrous metals..
R 35.36
Ex VAT:R 30.75
New Expected Date :
- 27/11/2024
Item No: TC08346
Rubber polishing point - Ø 6.4mm - Sharp point
Great for removing light scratch and grinding marks on metals.
Can be used to remove imperfections on ceramic and most stones.
QTY: 1....
R 23.98
Ex VAT:R 20.85
Item No: TC08347
Hard felt polishing wheel - Ø 12.7mm x 6mm
The hard felt polishing point can be used for polishing metals, glass, ceramics, precious metals, stone and plastic.
The polishing wheel fits on a pyramidal mandrel,
TC08353
Polishing compound
TC08367 can be used for polishing metals and plastics.
Do not mix different polishing past..
R 12.02
Ex VAT:R 10.45
Item No: TC08348
Hard felt polishing bullet - Ø 9.5mm x 20mm
The hard felt polishing point can be used for polishing metals, glass, ceramics, precious metals, stone and plastic.
The polishing point fits on a pyramidal mandrel,
TC08353
Polishing compound
TC08367 can be used for polishing metals and plastics.
Do not mix different polishing pas..
R 14.95
Ex VAT:R 13.00
Item No: TC08355
Black nylon bristle wire wheel- Ø 22.2mm
The black nylon bristle wire wheel is great for cleaning or light deburring and polishing.
Particularly ideal for silverware, jewelry and other precious metals.
The shape allows for use in hard-to-reach areas.
QTY: 1....
R 18.06
Ex VAT:R 15.70
Item No: TC08357
Black nylon bristle end brush - Ø 3.2mm
The black nylon bristle end brush is great for cleaning or light deburring and polishing.
Particularly ideal for silverware, jewelry and other precious metals.
The shape allows for use in hard-to-reach areas.
QTY: 1....
R 12.02
Ex VAT:R 10.45
Item No: TC08358
Carbon steel wire wheel- Ø 22.2mm
The carbon steel wire wheel is great for cleaning or deburring metal and plastic.
It can also be used for removing rust/corrosion and cleaning welds.
The wire brushes can also be used to create an artistic effect on soft wood. The wire brush removes the soft wood to expose the coarse grained growth rin..
R 18.06
Ex VAT:R 15.70
Item No: TC08364
Brass wire wheel brush - Ø 22.2mm
The brass wire wheel brush is great for cleaning or deburring soft metals like gold, copper and brass without scratching.
It can also be used for cleaning electrical components.
The shape allows for use in hard-to-reach areas.
QTY: 1....
R 18.06
Ex VAT:R 15.70
Item No: TC08367
Polishing compound
The polishing paste can be used to remove oxidations and light surface imperfections on metals and plastics.
Use with felt cotton polishing accessories.
QTY: 1....
R 21.10
Ex VAT:R 18.35
Item No: TC08376
Grout removal bit Ø 1.6mm
For removing old grout in tiles.
QTY: 1....
R 104.82
Ex VAT:R 91.15
Item No: TC08377
Grout removal bit Ø 3.2mm
For removing old grout in tiles.
QTY: 1....
R 104.82
Ex VAT:R 91.15
Item No: TC08381
HSS Beading router bit - 3mm radius
The HSS (High-speed steel) router bits are designed for mini rotary tools to be used for routing, inlaying and mortising in wood and soft materials.
Use with the correct attachment for the rotary tool to be able to use router bits effectively and safely:
For TCMT001 rotary tool, use
TCMT001DA....
R 110.80
Ex VAT:R 96.35
Item No: TC08386
HSS Straight router bit - Ø 3.2mm
The HSS (High-speed steel) router bits are designed for mini rotary tools to be used for routing, inlaying and mortising in wood and soft materials.
Use with the correct attachment for the rotary tool to be able to use router bits effectively and safely:
For TCMT001 rotary tool, use
TCMT001DA....
R 110.80
Ex VAT:R 96.35
Item No: TC08388
HSS Straight router bit - Ø 6.4mm
The HSS (High-speed steel) router bits are designed for mini rotary tools to be used for routing, inlaying and mortising in wood and soft materials.
Use with the correct attachment for the rotary tool to be able to use router bits effectively and safely:
For TCMT001 rotary tool, use
TCMT001DA....
R 110.80
Ex VAT:R 96.35
Item No: TC08389
HSS Keyhole router bit - Ø 7.9mm
The HSS (High-speed steel) router bits are designed for mini rotary tools to be used for routing, inlaying and mortising in wood and soft materials.
Use with the correct attachment for the rotary tool to be able to use router bits effectively and safely:
For TCMT001 rotary tool, use
TCMT001DA....
R 110.80
Ex VAT:R 96.35
Item No: TC08390
Quick change collet kit
The quick change collet allows you to fit the following collet diameters:
Ø 0.8mm
Ø 1.6mm
Ø 2.4mm
Ø 3.2mm
Make sure to tighten the collet nut with a collet wrench.....
R 77.74
Ex VAT:R 67.60
Item No: TC08393
Replacement collet - Ø 3.2mm
The collet is used to hold mini rotary accessories with a shank diameter of Ø 3.2mm....
R 23.98
Ex VAT:R 20.85
Item No: TC08394
Multi chuck - Ø 0.8mm - 3.2mm
The multi chuck is ideal for mini and micro drill bits, to secure hold different diameter accessories from Ø 0.8mm up to Ø 3.2mm....
R 98.67
Ex VAT:R 85.80
Item No: TC08396
Grinding point - Ø 7.1mm - Round point
The point is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smoothing/finishing
Carving
It can also be used o..
R 21.10
Ex VAT:R 18.35
Item No: TC08401
Grinding point - Ø 8.2mm - Wheel
The point is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smoothing/finishing
Carving
It can also be used on non-..
R 21.10
Ex VAT:R 18.35
Item No: TC08402
Grinding point - Ø 10mm - Wheel
The point is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smoothing/finishing
Carving
It can also be used on non-f..
R 14.95
Ex VAT:R 13.00
Item No: TC08404
Grinding point - Ø 9.5mm - Cylindrical
The point is made of bonded aluminium oxide.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 21.10
Ex VAT:R 18.35
Item No: TC08405
Grinding point - Ø 15.9mm - Cone shape
The point is made of bonded aluminium oxide.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 21.10
Ex VAT:R 18.35
New Expected Date :
- 27/11/2024
Item No: TC08408
Grinding point - Ø 6.4mm - Cone shape
The point is made of bonded aluminium oxide.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 21.10
Ex VAT:R 18.35
Item No: TC08409
Grinding point - Ø 10mm - Disc
The point is made of bonded aluminium oxide.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 21.10
Ex VAT:R 18.35
Item No: TC08412
Grinding point - Ø 9.5mm - Spherical
The point is made of bonded aluminium oxide.
It has a high abrasive power and is used for:
Sharpening
Deburring
Precision grinding
QTY: 2
The grinding stones are used on ferrous metals. Metals that have an iron content.....
R 21.10
Ex VAT:R 18.35
Item No: TC08416
Grinding wheel - Ø 20mm
The wheel is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smoothing/finishing
Carving
It can also be used on non-ferrous m..
R 18.06
Ex VAT:R 15.70
Item No: TC08417
Chainsaw sharpening stone - Ø 4mm
The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutting corner on a chainsaw blade.
Simply colour-in the side plate's bevel with a permanent marker and align the sharpening stone with the bevel and only remove the coloured in areas to reveal a new sh..
R 18.06
Ex VAT:R 15.70
Item No: TC08419
Chainsaw sharpening stone - Ø 5.6mm
The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutting corner on a chainsaw blade.
Simply colour-in the side plate's bevel with a permanent marker and align the sharpening stone with the bevel and only remove the coloured in areas to reveal a new ..
R 18.06
Ex VAT:R 15.70
Item No: TC08425
Sanding drum mandrel - Ø 6.4mm
The mandrel is used with Ø 6.3mm sanding drums for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.....
R 21.10
Ex VAT:R 18.35
Item No: TC08427
P60 Drum sanding sleeves - Ø 6.4mm
The Ø 6.4mm sanding drums are used for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the
TC08425 mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.
QTY: 12
Grit: P60....
R 51.00
Ex VAT:R 44.35
Item No: TC08428
P120 Drum sanding sleeves - Ø 6.4mm
The Ø 6.4mm sanding drums are used for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the
TC08425 mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.
QTY: 12
Grit: P120....
R 51.00
Ex VAT:R 44.35
Item No: TC08430
P120 Drum sanding sleeves - Ø 12.7mm
The Ø 12.7mm sanding drums are used for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the
TC08426 mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.
QTY: 12
Grit: P120....
R 62.91
Ex VAT:R 54.70
Item No: TC08431
P240 Drum sanding sleeves - Ø 12.7mm
The Ø 12.7mm sanding drums are used for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the
TC08426 mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.
QTY: 12
Grit: P240....
R 62.91
Ex VAT:R 54.70
Item No: TC08433
Silicon carbide sanding drum with mandrel - Ø 12.7mm
The Ø 12.7mm sanding drum is fitted with a coarse silicon carbide sanding sleeve to allow for aggressive sanding applications.
The sanding drum can also be used for rust removal.
QTY: 1....
R 12.02
Ex VAT:R 10.45
Item No: TC08436
Sanding discs - Ø 19.1mm
The sanding discs fit on a mandrel -
TC08352 and is used for sanding and shaping applications.
Great for detail sanding.
QTY: 6
Grit: P240....
R 41.92
Ex VAT:R 36.45
Item No: TC08437
Rotary flap grinding wheel - P120
For grinding and polishing metals, rubber and plastics.
Can be used on flat or contoured surfaces.
The flap sanding wheel can also be used for rust removal.
Grit: P120....
R 33.01
Ex VAT:R 28.70
Item No: TC08442
Diamond blade Ø 22mm
The cutting segment is continuous and works great for cutting marble, stone, porcelain, ceramic and hard resins.
The blade maintains a long life and allows for extreme precision work.
Use mandrel
TC08352 with the blade.
QTY: 2....
R 42.95
Ex VAT:R 37.35
Item No: TC08443
Diamond blade Ø 30mm
The cutting segment is continuous and works great for cutting marble, stone, porcelain, ceramic and hard resins.
The blade maintains a long life and allows for extreme precision work.
Use mandrel
TC08352 with the blade.
QTY: 2....
R 50.77
Ex VAT:R 44.15
Item No: TC10009
TorkCraft - Sheet Metal Cutter
Attachment with Extended Shaft
Carded Pack: Qty 1
Application:
Sheet metal cutters allows for cutting straight or irregular shapes into sheet metal stainless steel and other soft materials with a standard electric drilling machine, cordless drill or pneumatic drill.
Fits any electric drill or cordl..
R 960.88
Ex VAT:R 835.55
Item No: TC10011
SPARE CUTTING BLADE GUIDE FOR NIBBLER SAW ATTACHMENT TC10010....
R 116.50
Ex VAT:R 101.30
Item No: TC700310
COMB. DRILL & S/DRIVING SET 23PCS....
R 573.97
Ex VAT:R 499.10
Item No: TC801201
Buffing pad
Buffing
pad material:
Cotton
Diameter: Ø75mm
Bore: Ø6.0mm
Application:
The buffing pad is
not supplied with a chuck adaptor spindle.
TC335 is an arbor with a ø6.0mm shaft available for the buffing pad.
It is ideal for buffing jewelry and other metals. The concentrically sewn
sections add strength to the bu..
R 75.73
Ex VAT:R 65.85
Item No: TC801707
Buffing pad
Buffing
pad material:
Cotton
Diameter: Ø75mm
Bore: Ø6.0mm
Application:
The buffing pad is supplied with a chuck adaptor spindle.
It is ideal for buffing jewelry and other metals. The concentrically sewn
sections add strength to the buffing pad and it cleans surfaces without damaging
it.
How to use the com..
R 110.23
Ex VAT:R 95.85
Item No: TC801709
Buffing pad
Buffing
pad material:
Cotton
Diameter: Ø100mm
Bore: Ø6.0mm
Application:
The buffing pad is supplied with a chuck adaptor spindle.
It is ideal for buffing jewelry and other metals. The concentrically sewn
sections add strength to the buffing pad and it cleans surfaces without damaging
it.
How to use the co..
R 147.89
Ex VAT:R 128.60
New Expected Date :
- 27/11/2024
Item No: TC805120
Drum sanding kit sleeves
Drum sanding sleeves to use with drum sanding
arbor.[click
here]
SIZE: Ø12.7mm, Ø19mm, Ø25.4mm, Ø38.1mm, Ø50.8mm
GRIT: P120
These sleeves fit onto arbors in kit
with code
TCDS....
R 68.48
Ex VAT:R 59.55
Item No: TC805180
Drum sanding kit sleeves
Drum sanding sleeves to use with drum sanding
arbor.[click
here]
SIZE: Ø12.7mm, Ø19mm, Ø25.4mm, Ø38.1mm, Ø50.8mm
GRIT: P180
These sleeves fit onto arbors in kit
with code
TCDS....
R 68.48
Ex VAT:R 59.55
Item No: TC871501
Polishing compound
Application:
This is a light polishing compound to be used with a polishing buff to polish
metals:
Silver
Platinum
Gold
Brass
Copper
Tin
Pewter
Aluminium
Steel
Iron
Stainless steel
How to use the compounds and the buffing pads:
The adaptor is used to hold the buffing pad ..
R 82.46
Ex VAT:R 71.70
Item No: TC872100
Buffing pad
Buffing pad density: Medium
Diameter: Ø150mm
Bore: Ø12.5mm
Application:
The
buffing pad is used together with a chuck adaptor spindle supplied with the
TC874 polishing kits.
Alternatively the
TC336 arbor would also fit the buffing pad.
How to use the compounds and the buffing pads:
The adaptor is used..
R 209.99
Ex VAT:R 182.60