Item No: SC20809
Classic Torx Bits - 25 mm
TX Bit No. TX6
Packaging: Bulk (sold per piece)
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coati..
R 47.04
Ex VAT:R 40.90
Item No: SC20839
Classic Torx Bits - 25 mm
TX Bit No. TX9
Packaging: Bulk (sold per piece)
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coati..
R 40.14
Ex VAT:R 34.90
Item No: SC20842
Classic Torx Bits - 25 mm
TX Bit No. TX10
Packaging: 2 Pack Carded
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coating meth..
R 69.00
Ex VAT:R 60.00
Item No: SC20852
Classic Torx Bits - 25 mm
TX Bit No. TX15
Packaging: 2 Pack Carded
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coating meth..
R 47.27
Ex VAT:R 41.10
Item No: SC20859
Classic Torx Bits - 25 mm
TX Bit No. TX15
Packaging: Bulk (sold per piece)
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coati..
R 21.39
Ex VAT:R 18.60
Item No: SC20862
Classic Torx Bits - 25 mm
TX Bit No. TX20
Packaging: 2 Pack Carded
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coating meth..
R 47.27
Ex VAT:R 41.10
Item No: SC20872
Classic Torx Bits - 25 mm
TX Bit No. TX25
Packaging: 2 Pack Carded
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coating meth..
R 47.27
Ex VAT:R 41.10
Item No: SC20892
Classic Torx Bits - 25 mm
TX Bit No. TX30
Packaging: 2 Pack Carded
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coating meth..
R 47.27
Ex VAT:R 41.10
Item No: SC20902
Classic Torx Bits - 25 mm
TX Bit No. TX40
Packaging: 2 Pack Carded
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coating meth..
R 66.53
Ex VAT:R 57.85
Item No: SC20909
Classic Torx Bits - 25 mm
TX Bit No. TX40
Packaging: Bulk (sold per piece)
The Classic Torx Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by
means of various hardening and coat..
R 21.39
Ex VAT:R 18.60
Item No: SC21402
Square Recess | Robertson Bits
Square Recess Bit: No. 0 (length: 25 mm)
Packaging: 2 Pack Carded
A Robertson, also known as a square or Scrulox screw drive is specified as ANSI
Type III Square Centre and has a square-shaped socket in the screw head and a square
protrusion on the tool. Both the tool and the socket have a sli..
R 58.82
Ex VAT:R 51.15
Item No: SC21412
Square Recess | Robertson Bits
Square Recess Bit: No. 1 (length: 25 mm)
Packaging: 2 Pack Carded
A Robertson, also known as a square or Scrulox screw drive is specified as ANSI
Type III Square Centre and has a square-shaped socket in the screw head and a square
protrusion on the tool. Both the tool and the socket have a sli..
R 58.82
Ex VAT:R 51.15
Item No: SC21419
Square Recess | Robertson Bits
Square Recess Bit: No. 1 (length: 25 mm)
Packaging: Bulk (sold per piece)
A Robertson, also known as a square or Scrulox screw drive is specified as ANSI
Type III Square Centre and has a square-shaped socket in the screw head and a square
protrusion on the tool. Both the tool and the socket ha..
R 27.37
Ex VAT:R 23.80
Item No: SC21429
Square Recess | Robertson Bits
Square Recess Bit: No. 2 (length: 25 mm)
Packaging: Bulk (sold per piece)
A Robertson, also known as a square or Scrulox screw drive is specified as ANSI
Type III Square Centre and has a square-shaped socket in the screw head and a square
protrusion on the tool. Both the tool and the socket ha..
R 27.37
Ex VAT:R 23.80
Item No: SC21879
Classic Tamper Proof Torx Bits
TX Bit No. TX25
(25
mm)
Packaging: Bulk (sold per piece)
The Tamper Proof Torx driver is developed as a security application. See the picture of the example screw.
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across al..
R 24.50
Ex VAT:R 21.30
Item No: SC21902
Classic Tamper Proof Torx Bits
TX Bit No. TX40
(25
mm)
Packaging: 2 Pack Carded
The Tamper Proof Torx driver is developed as a security application. See the picture of the example screw.
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas ..
R 54.51
Ex VAT:R 47.40
Item No: SC23019
Classic Phillips Bits - 50 mm Long
PH Bit No. 1 - Bulk packaging
The Classic Bit
These classic PH bits are tough and suitable for heavy use for all demands. A best seller to the industry.
Universal hexagonal shaft in 6,35 mm (¼ inch)....
R 22.43
Ex VAT:R 19.50
Item No: SC23029
Classic Phillips Bits - 50 mm Long
PH Bit No. 2 - Bulk packaging
The Classic Bit
These classic PH bits are tough and suitable for heavy use for all demands. A best seller to the industry.
Universal hexagonal shaft in 6,35 mm (¼ inch)....
R 22.43
Ex VAT:R 19.50
Item No: SC23112
Classic Pozi 50 mm
PZ Bit No. 1 - 2 Pack Carded
Classic
The Classic Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based
on the Standard Bit, the other bits are optimised by
means of various hardening and coating methods. It
provides ..
R 52.61
Ex VAT:R 45.75
Item No: SC23151
Classic Pozi 70 mm
PZ Bit No. 2 - 1 Pack Carded
Classic
The Classic Bit is hardened using a special procedure.
The tough version resulting from this method meets the
demands across all areas of industry and craft.
Based
on the Standard Bit, the other bits are optimised by
means of various hardening and coating methods. It
provide..
R 39.22
Ex VAT:R 34.10
Item No: SC25170
Classic Hexagon Tamper Proof Bits
Tamper Proof Hex Bit: 4 mm (length: 25 mm)
Packaging: Bulk (sold per piece)
The Tamper Proof
Hex driver is developed as a security application. See the picture of the example screw. The Classic Hexagon Bit is hardened using a special procedure. The tough version resulting
from this method mee..
R 67.56
Ex VAT:R 58.75
Item No: SC37201
Magnetic Bit Holder
Magnetic Bit Holder ¼'
Length: 72mm
Packaging: 1 Pack Carded
An extension to use with your screwdriver to hold a Pozidriv, Square, Phillips or Slotted screwdriver bit by means of a magnet. Very useful to hold screws without hurting fingers. All bits with a ¼ inch drive will fit in this magnetic holder.
Universal ..
R 216.37
Ex VAT:R 188.15
Item No: SPC00052
Adaptor for a polisher
Thread:
M14 Male - M14 Female
Application:
The adaptor is used to extend the spindle shaft on a polisher. Some adaptors
have different threads on either end. These adaptors are mostly used to change
an imperial thread to a metric thread.
DEFINITION:
M - ISO metric screw thread.
....
R 78.26
Ex VAT:R 68.05
Item No: SPC00100
Compounding sponge
Pattern: Standard
Density: Soft
Colour: Yellow
Diameter: Ø200mm
Thread/Hook & Loop: Hook & Loop
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to..
R 124.89
Ex VAT:R 108.60
Item No: SPC00113
DA SANDER PAD HOOK AND LOOP 5 16 - 24UNF 8 HOLES MED SOFT 125MM 5'....
R 229.14
Ex VAT:R 199.25
Item No: SPC00120
Backing pad
Polishing backing pad with M14 thread.
DIA: 125mm (5')
HOLES: No
THREAD: M14 with Ø8mm adapter
hook and loop: Yes
Application:
This is a replacement backing pad for a polisher with M14 fastening thread.
The backing pad includes a M14 to Ø8mm adapter.
Attention:
Wear eye, face and body protection....
R 107.18
Ex VAT:R 93.20
Item No: SPC00122
Backing pad
hook and loop backing pad to be used with a drill.
DIA: 125mm (5')
HOLES: No
ARBOR: Ø6mm
hook and loop: Yes
Application:
This is a backing pad for hook & loop sanding discs, compounding
sponge and polishing bonnets. The backing pad
is fitted with an arbor to be used with electric or cordless drills.
Attention:
Wear eye,..
R 83.78
Ex VAT:R 72.85
New Expected Date :
- 17/01/2025
- 15/03/2025
Item No: SPC00125
hook and loop polishing wool buff
Diameter: Ø180mm
Use backing pad:
SPC00119
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with hook and loop. Make sure the diameter of the polishing buff is
t..
R 376.63
Ex VAT:R 327.50
Item No: SPC00128
HEAD LIGHT LENS RESTORATION KIT FOR CARS. TRUCKS & BIKES....
R 376.11
Ex VAT:R 327.05
New Expected Date :
- 27/11/2024
- 15/03/2025
Item No: SPC00129
INTERFACE CUSHION PAD 150MM HOOK AND LOOP NO HOLES....
R 154.96
Ex VAT:R 134.75
New Expected Date :
- 27/11/2024
Item No: SPC00203
FOAM PAD HOOK AND LOOP ORANGE SPONGE 150MM 6' LIGHT COMPOUNDING....
R 127.65
Ex VAT:R 111.00
Item No: SPC00205
FOAM PAD HOOK AND LOOP BLACK SPONGE 150MM 6' FINISHING....
R 127.65
Ex VAT:R 111.00
Item No: SPC00207
FOAM PAD HOOK AND LOOP RED SPONGE 150MM 6' ULTRA FINISHING....
R 111.72
Ex VAT:R 97.15
Item No: SSB405DZ
SCROLL SAW BL. 5' 125MM 20TPI WOOD PLAIN END 6PC....
R 235.64
Ex VAT:R 204.90
Item No: SSB41001
Scroll saw blades pinned
Pinned blades 127mm (5') for a scroll saw.
LENGTH:
127mm
(5') between pins
TPI: 7
PINS: Yes
Application:
The blades are manufactured to be used with scroll saws.
There are various
blade types available in the range with different teeth styles for different
uses.
A minimum pilot hole of 4.7mm is r..
R 204.82
Ex VAT:R 178.10
Item No: SSB427
Scroll saw blades pinned
Pinned blades 127mm (5') for a scroll saw.
LENGTH:
127mm
(5') between pins
TPI: 25
PINS: No
Application:
The blades are manufactured to be used with scroll saws.
There are various
blade types available in the range with different teeth styles for different
uses.
A minimum pilot hole of 4.7mm is r..
R 273.53
Ex VAT:R 237.85
Item No: SSB46300
SCROLL SAW BL. 5' 125MM 41TPI SPIRAL CUT WOOD PLAIN END 6PC....
R 219.36
Ex VAT:R 190.75
Item No: SSB47500
JEWELERS METAL PIERCING SAW BLADES 61TPI PLAIN END 6PC....
R 193.43
Ex VAT:R 168.20
Item No: SSB91218BL
SCROLL SAW SANDER 5' 125MM X 1/4' 180G PIN END 4PC....
R 323.44
Ex VAT:R 281.25
Item No: SSB92218BL
SCROLL SAW SANDER 5' 125MM X 1/4' 180G PLAIN END 4PC....
R 323.44
Ex VAT:R 281.25
Item No: SSB92508BL
SCROLL SAW SANDER 5' 125MM X 1/2' 80G PLAIN END 4PC....
R 323.44
Ex VAT:R 281.25
Item No: SSB92518BL
SCROLL SAW SANDER 5' 125MM X 1/2' 180G PLAIN END 4PC....
R 323.44
Ex VAT:R 281.25
Item No: SSB92522BL
SCROLL SAW SANDER 5' 125MM X 1/2' 220G PLAIN END 4PC....
R 323.44
Ex VAT:R 281.25
Item No: ST AB32
DBB
Morticer Cutters for
Aluminium Door Lock Installation
Size: 31,8mm (1 1/4')
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike.
Highlight
Older generation snap-on type cutter. With these specially design..
R 936.45
Ex VAT:R 814.30
Item No: ST CWB16
DBB
Morticer Carbide Cutters
Size: 16.2mm (5/8')
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike. For anyone who regularly fits mortice locks it will prove invaluable
- an accurate, speedy and professional t..
R 849.39
Ex VAT:R 738.60
Item No: ST CWB21
CARBIDE TIPPED CUTTER 21MM /LOCK MORTICER FOR WOOD SCREW TYPE....
R 922.30
Ex VAT:R 802.00
Item No: ST CWB22
DBB
Morticer Carbide Cutters
Size: 22.2mm (7/8')
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike. For anyone who regularly fits mortice locks it will prove invaluable
- an accurate, speedy and professional t..
R 965.83
Ex VAT:R 839.85
Item No: ST CWB23
DBB
Morticer Carbide Cutters
Size: 23.0mm
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike. For anyone who regularly fits mortice locks it will prove invaluable
- an accurate, speedy and professional tool tha..
R 930.87
Ex VAT:R 809.45
Item No: ST CWB25
DBB
Morticer Carbide Cutters
Size: 25.4mm (1')
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike. For anyone who regularly fits mortice locks it will prove invaluable
- an accurate, speedy and professional too..
R 916.21
Ex VAT:R 796.70
New Expected Date :
- 21/01/2025
Item No: ST DBB-HK
HOUSING KIT DOORS UP TO 55MM DBB....
R 1,393.92
Ex VAT:R 1,212.10